Ribbon Documentation Portal will be unavailable Thursday February 2nd 2023 between 2:00 PM EST ~ 12:00 PM. More Info
Page tree
Skip to end of metadata
Go to start of metadata

Tip

The configuration steps described in this article are examples.

Ribbon recommends referring to the SBC and PSX product documentation for detailed information on the commands, parameters, and flags used in the configuration examples of this guide.

Process the steps in the same order as described in this article.

Note

This article is OPTIONAL; skip this article if you use basic ERE or Advanced ERE for call routing.

 

Use the following command to disable the local PSX server, and then enable the remote PSX server.

% set system policyServer localServer "PSX_LOCAL_SERVER" state "disabled" mode "outOfService" 
% commit
% set system policyServer remoteServer "RBBNMSPSX" ipAddress "172.16.106.149" state "enabled" mode "active"
% commit 

 

 

  • No labels