Page tree
Skip to end of metadata
Go to start of metadata
Standard Configuration

Exact match to official configuration. This is only relevant for HP DL380 HW installs. The return code in this case will be 0, which means success.

Supported Configuration

For physical hardware this means that there is some variation from the Standard Configuration, but the software scan be installed and run without issue. A “supported configuration” may also be flagged for standalone installs that do not have the HBA or additional NIC card installed. The return code in this case will be 0.

Supported Config may have the following variations from the standard configuration:

  • Extra Memory
  • Extra or Larger Physical Drives
  • Extra hardware such as HBA’s for standalone server
  • Larger Power Supply
Unsupported Configuration

For physical hardware it means that the configuration is not approved, but expected to work. This may be due to the choice of optional hardware. An unsupported configuration will also be signaled if there is an attempt to install the sbc on native hardware. The return code in this case will be 255.

Unsupported Config may have the following variations from the standard configuration:

  • Different (even larger) processor model
  • Incorrect firmware versions
  • Exact CPU number mismatch
Failed Configuration

The configuration cannot support the application. This is generally missing or inadequate hardware size. The return code in this case will be 255.

  • No labels