Skip to end of metadata
Go to start of metadata

A sequence of Link attributes



Parameter Name Required Create Read-Only Data Type Description
SLC Yes Yes Yes int32 Signaling Link Code for this link. Value of 0-15 TL1Name: SLC
Context No No Yes string A condensed textual representation of the link object. TL1Name: CONTEXT
APC No No Yes string Adjacent SS7 point code of this link TL1Name: PC
LinkName No No Yes string Link Name based on the Linkset Name. TL1Name: LINK_NAME
DREID No Yes Yes int32 DRE ID of the DRE that owns this link. TL1Name: DRE_ID
LocalIPAddress1 No No No string Primary local address. TL1Name: LOCAL_IPADDR1
LocalIPAddress2 No No No string Secondary local address TL1Name: LOCAL_IPADDR2
LocalPort No No No int32 M2PA Local Port. TL1Name: LOCAL_PORT
RemoteIPAddress1 No No No string Primary remote address. TL1Name: REMOTE_IPADDR1
RemoteIPAddress2 No No No string Secondary remote IP address. TL1Name: REMOTE_IPADDR2
RemotePort No No No int32 M2PA Remote Port. TL1Name: REMOTE_PORT
L2State No No Yes L2LinkState Status of M2PA for this link. TL1Name: L2_STATE
L3State No No Yes L3LinkState Status of MTP Level 3 for this link. TL1Name: L3_STATE
CongestionLevel No No Yes CongestionLevel Congestion level of this link. TL1Name: CONGESTION_LVL
RxMSUCount No No Yes int32 Received MSU count, per second. TL1Name: RXMSU
TxMSUCount No No Yes int32 Transmitted MSU count, per second. TL1Name: TXMSU
DiagnosticMessage No No Yes string Link management diagnostic message TL1Name: DIAG_MSG
DataLinkBandwidth No No No int32 M2PA DataLink Baud Rate in kbps TL1Name: M2PA_DLINK_BANDWITH
M2PAVersion No No No M2paDefaultVersion M2PA Version used to manage this link TL1Name: M2PA_VERSION
Alarms No No No Feature Alarms TL1Name: ALARMS
UserActivated No No Yes Feature Link activation flag. Used on stack restart for alignment attempt. TL1Name: USR_ACTIVATED
GR310VirtualLink No No No Feature Indicates whether the M2PA Link represents GR310 M2PAVLK. TL1Name: GR310_M2PAVLK
DataDebugLevel No No No int32 Data Debug Level TL1Name: DATA_DBG_LVL
ProtocolDebugLevel No No No int32 Protocol Debug Level TL1Name: PROT_DBG_LVL
SoftwareDebugLevel No No No int32 Software Debug Level TL1Name: SW_DBG_LVL
SCTPDebugLevel No No No int32 SCTP debug level for association debugging TL1Name: SCTP_DBG_LVL
TXAbatementL1 No No No Percent10to100 Transmit Congestion Abatement Level 1 (% of buffer usage) TL1Name: TXABTL1
TXOnsetL1 No No No Percent10to100 Transmit Congestion Onset Level 1 (% of buffer usage) TL1Name: TXONSTL1
TXAbatementL2 No No No Percent10to100 Transmit Congestion Abatement Level 2 (% of buffer usage) TL1Name: TXABTL2
TXOnsetL2 No No No Percent10to100 Transmit Congestion Onset Level 2 (% of buffer usage) TL1Name: TXONSTL2
TXAbatementL3 No No No Percent10to100 Transmit Congestion Abatement Level 3 (% of buffer usage) TL1Name: TXABTL3
TXOnsetL3 No No No Percent10to100 Transmit Congestion Onset Level 3 (% of buffer usage) TL1Name: TXONSTL3
RXAbatementBusy No No No int32 Receive Congestion Abatement Busy (bytes per second) TL1Name: RXABT_BUSY
RXOnsetBusy No No No int32 Receive Congestion Onset Busy (bytes per second) TL1Name: RXONST_BUSY
TXQueueSize No No No int32 Maximum M2PA TX Queue Size (number of bytes) TL1Name: TXQSIZE
LinksetSCTPValues No No No YesNoState When this is set, the link uses the M2PA Linkset SCTP values. TL1Name: LS_SCTP_VALUES
Heartbeat No No No Feature On / Off Heartbeat Feature TL1Name: HB
HeartbeatInterval No No No int32 Heartbeat interval (ms) TL1Name: HB_INV
RTOInitial No No No int32 RTO Initial (ms) TL1Name: RTO_INIT
RTOMinimum No No No int32 RTO Minimum (ms) TL1Name: RTO_MIN
RTOMaximum No No No int32 RTO Maximum (ms) TL1Name: RTO_MAX
MaximumPathRetrans No No No int32 Maximum path retransmissions TL1Name: MX_PATH_RETRANS
MaximumAssocRetrans No No No int32 Maximum association retransmissions TL1Name: MX_ASSOC_RETRANS
Bundling No No No Feature Bundling On / Off TL1Name: BUNDLING
BundlingTO No No No int32 Bundling TO (ms) TL1Name: BUNDLING_TO
DelayedACKTO No No No int32 Delayed ACK TO (ms) TL1Name: DELAYACK_TO
FastRetransThreshold No No No int32 Fast Retransmit Threshold TL1Name: FAST_RETRANS_TH
Checksum No No Yes SCTPCheckSum SCTP Checksum TL1Name: CHECKSUM
SendINIT No No No Feature When ENABLED, the local endpoint sends SCTP INIT to the remote endpoint. TL1Name: SEND_INIT

  • No labels