Log Exchange (LX) can act as a syslog server for Ribbon products to captures SIP call routing messages and SBC system logging messages. The following platforms are supported:
- SBC Edge (1000/2000)
- SBC Core (5000/7000 series, SWe)
- VX series gateways
Configure Ribbon Product
In order for the LX to receive logging information, the Ribbon product must first be configured correctly. The following are links to the appropriate sections for each system.
SBC Edge (1000/2000)
For the SBC Edge, configure the Remote Log Server to send logging information to the machine running the LX. For details, see Managing Remote Log Servers.
SBC Core (5000/7000 series, SWe)
For the SBC Core, configure the Event Log to send logging information to the machine running the LX. For details, see Event Log - Type Admin.
For the VX Series, configure the Logging Information to send logging information to the machine running the LX. For details, see Logging Information.
The only action needed on the LX is to set the Listening Port.
To set the Listening Port
From the main menu, click Syslog Server
From the Listen IP drop-down menu, select either the IPv4 or IPv6 address.
From the Transport drop-down menu, select either the UDP or TCP transport method.
In the Listen Port textbox, enter a port number.
The default port number is 514. Port 514 is the port over which the UX transmits syslog traffic.
Click Start Listening to begin capturing syslog traffic.
For more information about syslogs, see Working with Syslogs.