Skip to end of metadata
Go to start of metadata

SBC can be accessed using CLI and EMA interfaces and the access to these interfaces are authenticated using the user creditials. User credentials can be verified using local or external authentication.

 

On this page:

For local authentication, the user credentials are validated against locally stored user database and for external authentication, the user credentials are sent to an remote RADIUS server and authenticated.

In SBC 5000 series, to configure RADIUS authentication, you need to first enable external authentication and then configure the remote RADIUS server.

Enabling Remote Authentication

To enable remote authentication:

  1. Login to SBC CLI.
  2. Change to the Configuration mode:

    > configure private
  3. Execute the following command:

    % set system admin litchi localAuthenticationEnabled false externalAuthenticationEnabled true

You can also enable the external authentication using EMA. For more information, see System-Admin.

Configuring RADIUS Server

To configure the remote RADIUS Server:

  1. Login to SBC CLI.
  2. Change to the Configuration mode:

    > configure private
  3. Execute the following command:

    % set oam radiusAuthentication radiusServerIp <serverIP> radiusSharedSecret <shared_secret> radiusNasIp <nas IP> radiusServerPort <radius_server_port>
  4. You can configure RADIUS server using EMA. For more information, see Radius Authentication.

Related Topics

Adding Users to SBC 5000 Series

User Management 

  • No labels