Skip to end of metadata
Go to start of metadata

The following section describes how to save the existing Sonus SBC Portfolio configuration.

  1. Login to the SBC active server CLI. Execute the following command to save the SBC configuration.

    > request system admin <SBC_System_Name> saveConfig

     

    Example:
    admin@SBC01a> request system admin WFDSBC01 saveConfig 
    This command will save the current configuration. Do you want to continue (yes/no) yes
    Proceeding
    result success
    reason Configuration Saved as /var/log/sonus/sbx/config/config_WFDSBC01_20130918_193400.tar.gz
    [ok][2013-09-18 19:42:11]
    admin@SBC01a>
    
    This command saves the current configuration to a time-stamped zipped tar file located in /var/log/sonus/sbx/config directory of SBC active server.
  2. Use SFTP to copy the configuration file from target system to any temporary directory on the server. Execute following command on any Windows-based software that supports SFTP (default login/password is sftpadmin/sftpadmin):

    Example:
    # sftp -oPort=2024 sftpadmin@WFDSBC01a:/var/log/sonus/sbx/config/config_WFDSBC01_20130918_193400.tar.gz /home/bob/SBC5000/config
    sftpadmin@WFDSBC01a's password: <sftpadmin>
    Connected to WFDSBC01a.
    Fetching /var/log/sonus/sbx/config/config_WFDSBC01_20130918_193400.tar.gz to /home/bob/SBC5000/config

    Note

    The backup file created by this procedure is used to restore the system configuration if re-installation of the software is needed for any reason. To reload the configuration, see Reloading the SBC Portfolio Configuration for guidance.

  • No labels