Skip to end of metadata
Go to start of metadata

In this section:

This profile to provision number translation labels that hold together a collection of individual rules, and are used to determine whether to launch or to skip a service.

Use this object to configure Number Translation Criteria for one of following element types: calling number, carrier, trunk group or none.

This entity is not available in ERE when the SBC is configured for ePSX. It is instead configurable from the PSX. See PSX documentation for details.

To View Number Translation Criteria

On SBC main screen, go to Configuration > System Provisioning > Category: Call Routing > Profiles > Number Translation Criteria. The Number Translation Criteria window is displayed.

Figure : Call Routing - Profiles - Number Translation Criteria

 

To Edit Number Translation Criteria

To edit any of the Number Translation Criteria in the list, click the radio button next to the specific Number Translation Criteria name.

Figure : Call Routing - Number Translation Criteria Highlighted

 

The Edit Selected Number Translation Criteria window is displayed below.

Figure : Call Routing - Profiles - Number Translation Criteria Edit Window

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To Create Number Translation Criteria

To create a new Number Translation Criteria, click New Number Translation Criteria tab on the Number Translation Criteria List panel.

Figure : Call Routing - Profiles - Number Translation Criteria Fields

 

The Create New Number Translation Criteria window is displayed.

Figure : Call Routing - Profiles - Number Translation Criteria Create Window

 

The following fields are displayed:

Table : Number Translation Criteria Parameters

Parameter

Description

Criteria Label

A label text string used to identify this toll-free prefix record. Specifies a descriptive text label for the Service Definition entity as the Trigger Criteria or Escape Criteria.

Element Type

The type of Call Processing Element that is associated with the treatment.

Element Id1

A Non-Subscriber or Subscriber ID could include an entire Calling Number or some number of leading digits (i.e. 978, 7559). Any value in this field should be in the corresponding Call Processing Element entity.

Element Id2

If Call Processing Element1 Id contains a Trunk Group Id then this field must contain the associated Gateway Id, which should be in the Trunkgroup entity. If Call Processing Element1 Id contains an Authcode Id then this field must contain the associated Authcode Group Id, which should be provisioned via the Authcode Group entity.

National

Identifies the Called Number or leading digits of a Called Number (i.e., 978). The number of digits may vary per record, but all digit string lengths (i.e., 10,6,3,0) in this entity must be provisioned in the Called National Id Matching attribute in the Country entity to ensure appropriate call routing.

Country

A unique identifier for the country code.

Lookup Type

Indicates the type of lookup used for number translation. The options are:

  • e911 – (NA variant only)
  • enumCnam – ENUM CNAM
  • enumLnp – ENUM LNP
  • enumSipAor – ENUM SIP Address of Record

To Copy Number Translation Criteria

To copy any of the created Number Translation Criteria and to make any minor changes, click the radio button next to the specific Number Translation Criteria to highlight the row.

Figure : Call Routing - Number Translation Criteria Highlighted

 

Click Copy Number Translation Criteria tab on the Number Translation Criteria List panel.

Figure : Call Routing - Profiles - Number Translation Criteria Fields

 

The Copy Selected Number Translation Criteria window is displayed along with the field details which can be edited.

Figure : Call Routing - Profiels - Number Translation Criteria Copy Window

 

Make the required changes to the required fields and click Save to save the changes. The copied Number Translation Criteria is displayed at the bottom of the original Number Translation Criteria in the Number Translation Criteria List panel.

To Delete Number Translation Criteria

To delete any of the created Number Translation Criteria, click the radio button next to the specific Number Translation Criteria which you want to delete.

Figure : Call Routing - Number Translation Criteria Highlighted

 

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Figure : Call Routing - Profiles - Number Translation Criteria Delete Confirmation

 

Click OK to remove the specific Number Translation Criteria from the list.

 

  • No labels