SBC 52x0, SBC 5400, and SBC 7000 Interfaces
The basic media Ethernet ports structure for the various SBC 5000 and SBC 7000 series systems is shown below.
SBC 51x0 Interface
The SBC 51x0 includes two Ethernet ports serviced by processor 1 as shown below. Processor 1 services Pkt0 and Pkt1.
SBC 52x0 Interface
The SBC 52x0 includes four Ethernet ports serviced by processors 1 and 2 as shown below. Processor 1 services Pkt0 and Pkt1, and processor 2 services Pkt2 and Pkt3.
SBC 5400 Interfaces
The SBC 5400 contains a single network processor such that all packet ports are bound to the single processor. However, there are two modes. Two 10 GB packet port mode (2x10G) and four 1 GB packet port mode (4x1G).
SBC 7000 Interfaces
The SBC 7000 contains two active/standby Ethernet port pairs (Pkt 0 and Pkt 1) serviced by processors 1 and 2 as shown below.
Configuring IP Interface Groups
Prior to release 4.2.0, creating IP Interface Groups that were not "processor friendly" was completely disallowed. IP interfaces carried on a physical Ethernet port served by processor 1 were not combined in an IP Interface Group with IP interfaces carried on a physical Ethernet port served by processor 2.
The SBC 52x0 and SBC 7000 are enhanced to ease some restrictions on which IP Interfaces may coexist in an IP Interface Group.
These rules do not apply to the SBC 51x0 systems which have only two physical media ports (see SBC 51x0 Interface). IP interfaces from the two physical ports are configured within the same IP Interface Groups without restriction.
New Feature Functionality
The previous restrictions are relaxed in certain cases beginning with release 4.2. The user may now create IP Interface Groups containing sets of IP interfaces that are not "processor friendly" (i.e. carried on physical Ethernet ports served by separate processors). However, restrictions exist regarding the usage of such Interface Groups.
The new IP Interface Group membership and usage rules are listed below:
- Each “Application” capable of referencing an interface group is permanently identified as requiring or not requiring processor-friendly groups.
- Applications requiring processor-friendly groups may only have a configuration reference to processor-friendly groups.
- Applications not requiring processor-friendly groups may have a configuration reference to any IP Interface group.
= not required
|IP Interface Group Reference|
|3GPP IMS access IPsec||ipInterfaceGroupName|
IP ACL rule
Other application access control refs
SBC 52x0 Tip
Using ports 0-1 on one side and 2-3 on the other side in a typical inside/outside deployment avoids ill effects of any potential interface group restrictions.
SBC 7000 Tip
Using ports 0 on one side and 1 on the other side in a typical inside/outside deployment avoids ill effects of any potential interface group restrictions.
Configuring Media Interfaces
An IP interface group is heterogeneous to facilitate configuring a media interface group with mixed IP versions. This is useful to support different versions of signaling and media legs in the same call:
- SIP Signaling Port will point to IP Interface group for Signaling
- SIP Trunk group will point to IP Interface group for Media
CLI examples for creating interfaces and interface group:
Enabling media/packet interfaces:
Assigning an interface group for media usage:
Configuration Error Examples
The following example shows the error received when attempting to provision a non-media application on a non-friendly interface group. In this example, "LIG3" is configured with interfaces hosted on different ports that span multiple processors.
The following example shows the error received when attempting to add an interface hosted on a different processor to an existing processor-friendly group. All interfaces in the existing group LIG1 are hosted on the same packet port with SIP signaling ports defined. When an attempt is made to add an interface hosted on another packet port that is serviced by a different processor (i.e making it processor-unfriendly), the operation is disallowed because applications are already using the group.