Skip to end of metadata
Go to start of metadata

 

In this section:

Modified: for 5.1.3

 

This object specifies the Lwresd Profile configuration.

To View Lwresd Profile List

On SBC main screen, navigate to All > Global > Servers > Lwresd Profile. The Lwresd Profile window is displayed.

Figure : Lwresd Profile

Currently, SBC supports only one Lwresd Profile (DEFAULT). Deletion of the default profile is not allowed.

To Edit Lwresd Profile

To edit the Lwresd Profile, click the radio button next to the Lwresd Profile.

Figure : Lwresd Profile Highlighted

 

The Edit Selected Lwresd Profile window is displayed.

Figure : Edit Selected Lwresd Profile

 

The fields displayed in the Lwresd Profile window and their descriptions are as follows:

Table : Lwresd Profile Parameters

ParameterDescription
Name

Profile name used by the SLWRESD process. The default profile name is DEFAULT. The SLWRESD process uses the ENUM zones configured for performing an ENUM query against Enum Domain Label.

DescriptionTextual description (1-255 characters) of Lwresd Profile.
ENUM Domain Label Name 

The ENUM domain name label created for Enum Domain Name Label entity. Use this parameter to associate the Lwresd Profile with a particular Enum Domain Name Label.

Currently, SBC supports only one label name (DEFAULT_ZONE_LABEL).

Enable Lwresd LogUse this flag to enable/disable LWRESD log.
  • Disable (default)
  • Enable
Type

Interface type supported by Policy Server.

  • Mgmt (default)
  • IP
Address Context

Address Context for the Policy Server's IP Interface Group. For more information on Address Context. refer to Address Context - CLI.

Note: This is an existing parameter, but it's usage in the context of lwresdProfile is new.

IP Interface Group

The IP Interface Group used to communicate with the external PSX. For more information on IP Interface Group, refer to IP Interface Group - CLI.

Note: This is an existing parameter, but it's usage in the context of lwresdProfile is new.

 The fields Address Context and IP Interface Group are displayed only if you set the Type field to IP.

To set the Type field to Mgmt

By default, the Type field is set to Mgmt.

Figure : Edit Selected Lwresd Profile - Type: Mgmt

To set the Type field to IP

For the Type field, select the radio button corresponding to IP.

The Address Context field is displayed. Select the desired Address Context from the adjacent dropdown list.

Figure : Edit Selcted Lwresd Profile - Addres Context - dropdown

 

The IP Interface Group field is displayed. Select the desired IP Interface Group from the adjacent dropdown list.

Figure : Edit Selcted Lwresd Profile - IP Interface Group - dropdown

 

The final configuration is displayed.

Figure : Edit Selected Lwresd Profile - Type: IP - Complete Configuration

 

 

Click Save to save the Lwresd Profile. Click Undo Edits to cancel all modifications.

On saving the configuration successfully, the Success message is displayed.

Figure : Success Message (IP)