The table below describes the fields available in a trigger request:
If checked, this trigger request will be sent to the SBC.
If the trigger response is successful the next trigger request is processed (if it's Present check box is selected). If the Present check box is not checked, subsequent trigger requests will not be sent to the SBC.
If checked, specifies that routes are required for this trigger request.
If checked, EDP notification operation will be performed, otherwise the EDP request operation will be performed.
Mid Call Trigger
If checked, specifies that this is a mid call trigger request.
Operation Type of the operation requested.
The Authcode Group ID.
Identifies the variables and their type to be used in this trigger request.
Expected result of the trigger request.
Identifies the name, family, port number, and IP address of the gateway associated with the simulated call's policy request.
Specifies the triggering number and related attributes.
Called Directory Number
Specifies the called directory number.
Call Information Report
Specifies the call information report.
Specifies the carrier code.
Specifies the correlation ID.
Scp Carrier Code
Specifies the SCP carrier code; this is the same as the basic carrier code.
Chosen Carrier Info
Specifies the chosen carrier information.
Specifies the Higher Layer Compatibility parameter value received in signaling for ISDN/ISUP interworking.
Specifies the jurisdiction information parameter. Stores the NPA/NXX assigned to the trunk or extracted from the calling party number.
Specifies the Lower Layer Compatibility parameter value received in signaling for ISDN/ISUP interworking.
Nature of Connection
This is used to specify the following information for the call:
This is a Japan-specific ISUP parameter. It includes the originating carrier code of the incoming call.
This parameter, National Forward Call Indicator, contains zoning indicator, charge indicator, and IN call indicator fields.
Specifies the originating carrier of the call.
Specifies whether or not number portability information is included in the request (NP Status), and whether the Query on Release (QoR) is in the ingress message or the local exchange must perform the lookup (NPI Flags). This is for INAP use only.
Specifies the presentation number.
Called IN Number
Specifies the called IN number.
Specifies the original dialed number.
Specifies the redirect forward information.
Specifies the redirection capability.
Specifies the SCF (Service Control Function) identifier.
Specifies the P-Charging-Vector.
Specifies the source trunk group for the call.
Transit Carrier Info
Specifies the transit carrier information for the call.
Specifies the trunk group attributes.
Contains a universally unique call identifier (ID) comprised of the node ID (a number identifying the switch), a boot count (the number of reboots on the switch), and a Call ID. This parameter is encoded as a string containing a hexadecimal representation of the data.