Skip to end of metadata
Go to start of metadata

 

The request global command is available from both System-level and Configure CLI modes.

To initiate action on global object, use following command syntax.

> request global  
	callCountReset 
	callTrace action command start
	dnsClearCache
	mediaCapture disabledByGcid gcid <gcid#>  
	sipRec 
		startRecord gcid <GCID> callLeg ingress trunkGroup <TRUNK GROUP NAME> srsIpAddress <SRS IP ADDRESS> srsPort <SRS PORT>
		stopRecord gcid <GCID>
   terminateCall GCID <gcid#>

Table : request global Parameters

 

Parameter

Description

global

Global objects applicable node-wide.

callCountReset

This object resets all statistics counts to zero.

callTrace

Call Trace Group configuration for the Node. Use this parameter to restart call trace when it is halted due to MaxTrigger or some other reason. Full syntax is:

> request global callTrace action command start

Note

This command is only exposed after a callTrace configuration is performed. If no entries are present in the callTrace, this command is not available from CLI.

dnsClearCache
Clear the full DNS cache.
mediaCapture

Reset call count for media capture with following arguments:

  • disabledByGcid
  • gcid <gcid#> (range: 0-2147483647)
sipRec

Use this object to start/stop recording for the specified call.

  • startRecord
    • gcid – GCID of call to start recording.
    • callLeg Call leg associated with this recording session.
      • egress
      • ingress
    • srsIpAddress – IP address of the Recording Server.
    • srsPort – UDP Port of the Recording Server.
    • trunkGroup  – Name of the SIPREC trunk group associated with this recording session.
  • stopRecord
    • gcid – GCID of call to stop recording.

Note

The SIPREC feature is controlled by a system-wide SBC license (SBC-SIPREC). If the license is not available, any SIPREC recording returned by a PSX is ignored.

Note

 When SIPREC is selected as the Recorder Type, and Recording Type is selected as “both legs” and “all legs”, the SBC by default records the ingress leg.

terminateCall

Terminates call based on the specified Global Call Identifier (GCID). 

  • GCID <gcid#>
  • No labels