Skip to end of metadata
Go to start of metadata

 

Perform the following steps to save the existing SBC configuration.

  1. Log on to SBC CLI. Execute the following command to save the SBC configuration.

    Example:
    admin@SBC01a> request system admin SBC01 saveConfig 
    This command will save the current configuration. Do you want to continue (yes/no) yes
    Proceeding
    result success
    reason Configuration Saved as /var/log/sonus/sbx/config/config_SBC01_20110824_021127.tar.gz
    
    This command saves the current configuration to a time-stamped zipped tar file located in /var/log/sonus/sbx/config directory of SBC active server.
  2. Use SFTP (default login/password is sftpadmin/sftpadmin) to copy the configuration file from the active server to the remote server. Following is an example to transfer the saved configuration file to a remote linux server.

    Example:
    # sftp -oPort=2024 sftpadmin@SBC01a:/var/log/sonus/sbx/config/config_SBC01_20110824_021127.tar.gz /home/bob/SBC01/config
    sftpadmin@SBC01a's password: <sftpadmin>
    Connected to SBC01a.
    Fetching /var/log/sonus/sbx/config/config_SBC01_20110824_021127.tar.gz to /home/bob/SBC01/config
    The backup file created by this procedure is used to restore the system configuration if re-installation of the software is needed for any reason. To reload the configuration, see Restoring the SBC Configuration for guidance.

  • No labels