|Ribbon Documentation Center|
The following CLI operations are available in Configure mode.Click a link to go directly to that topic.
To exit Configure mode and return to System-level mode, enter either
When issuing commands in the Configure mode, you must perform a
commit operation for the changes to take effect.
Any command that changes the mode or state of an object must be entered and committed separately. The examples under the
set command description include the appropriate commit entries.
The SBC limits the number of
set operations to commit at one time (equates to modifying approximately 100 field values). To avoid errors, issue the
commit command on a regular basis to execute small batches of commands.
Optional arguments to include with the
commit command are described in the table below.
|Confirm a pending commit|
|Commit current set of changes and exit Configuration mode|
|Validate current configuration|
|Add a commit comment|
|Commit current set of changes with a timeout|
|Add a commit label|
|Commit current set of changes; do not query user|
|Specify a persist-id|
delete command to a specific data element, object, profile or configuration.
Objects scoped to a specific IP addressing domain. Global objects applicable node-wide. Operations and Maintenance objects. Profiles of configuration shared by multiple objects. System-level configuration.
diamNode – Diameter Node configurations.
dnsGroup – DNS Server Groups in this address context.
ipAccessControlList – IP Access Control lists for this address context.
ipInterfaceGroup – Groupings of IP interfaces in this address context.
ipsec – Ipsec configuration, security policy database, ike peer table.
linkDetectionGroup – Link Detection Groups in this address context.
natDirectMediaGroup – Group of Signaling IP Addresses of NAT devices amongst which Direct media is supported.
rtpServerTable – This table is used to create a name for a RTP Server Table table.
staticRoute – Static IP routes for this address context.
zone – Signaling, media, and control for a zone in the address context.
cac – Global CAC objects.
callRouting – Global call routing objects.
callTrace – Call Trace Group configuration for the Node.
carrier – Carrier definitions.
country – Country definitions.
license – License data.
monitorEndpoint – the monitor endpoint (MCT)
monitorTarget – the monitor target.
npaNxx – Npa Nxx.
qoeCallRouting – QOE based call routing.
script – Default scripts for call control.
security – Global security objects.
servers – Global server objects.
signaling – Global Signaling objects
sipDomain – SIP Domain.
subscriber – Subscriber.
Use this option to choose not to receive delete confirmation.
accounting – Accounting management.
alarms – Alarm configuration and status.
eventLog – Event log management.
localAuth – Local authentication and authorization configuration.
radiusAuthentication – Configuration for Radius authentication server.
snmp – SNMP configuration.
traps – Trap management.
callRouting – Profiles related to call routing (elementRoutingPriority, timeRangeProfile, etc).
digitParameterHandling – Profiles for manipulating digits (Calling, Called, etc) and other call processing parameters.
digitProfile – Profile defining digit generation and digit detection.
dtmfTrigger – Profile defining conditions for triggering on DTMF digit strings.
featureControlProfile – Name of the feature control profile
ipSignalingPeerGroup – Represents a IP signaling peer group that identifies set of Ip peer.
media – Profiles related to media control (Packet Service Profile, Codec Profiles, etc).
security – Profiles related to security (tlsProfile, cryptoSuiteProfile, etc).
services – Profiles related to call services (Disconnect Treatment, Emergency, ARS, etc).
signaling – Profiles related to call signaling (IPSP, SIP Adaptor, Number Globalization, CauseCode Mapping, etc).
sipCacProfile – Profile defining call/registration admission control for a SIP endpoint.
system – System level profiles.
admin – Basic configuration (name, location, etc) for the system.
congestion – System congestion profile for the node.
daughterBoardAdmin – The daughter board admin table describes the configuration of each daughter board. (Not applicable to SBC SWe.)
dspPad – DSP PAD configuration. Service must be restarted for new config to take effect.
ethernetPort – Configuration for management, packet, and field-service Ethernet ports.
fileStatisticsAdmin – File statistics administrative data.
intervalStatistics – The system-wide settings for interval statistics.
jsrcServer – JSRC server configuration.
logicalMgmtIpInterface – The logical management IP interface.
media – System-wide media configurations, udp port range and rtp/rtcp peer inactivity timeout.
mediaProfile – DSP Media Profile configuration.
mgmtIpInterfaceGroup – A group of management IP interfaces for the default address context.
mgmtStaticRoute – Static IP routes for this address context.
ntp – NTP Services Management.
policyServer – Configures softswitch servers and client services.
security – The MIB Module for Security Management.
serverAdmin – The serverAdmn table describes the configuration of each server module.
Objects scoped to a specific IP addressing domain.
Global objects applicable node-wide.
Operations and Maintenance objects.
Profiles of configuration shared by multiple objects.
edit command allows you to edit a particular data element, object, profile or configuration.
exit operation to exit the Configure mode and revert to System mode.
help operation is a fast and simple means to learn more about the available commands and correct command syntax. For more information, refer to Using CLI Help.
quit operation serves the same function as
exit and takes you out of the Configure mode and revert to System mode.
request operation facilitates system-level requests for the following objects from both System and Configure modes.
addressContext– Objects scoped to a specific IP address domain.
alarms– Alarm Management
global– Global objects that are applicable Node wide
message– Send message to terminal of one or all users
oam– Operations and Maintenance objects.
system– System operations
revert operation to revert to the previous configuration state. When prompted, enter
y to proceed. To revert without receiving the confirmation prompt, enter
Use operation to roll the database back to the last committed version.
rollback options and obtain an index number, enter
rollback followed by Tab key. For example:
set operation to create or modify an object. The objects associated with this command are listed below and defined in subsequent chapters in this guide.
addressContext– Objects scoped to a specific IP addressing domain. See Address Context - CLI.
global– Global objects that are applicable Node wide. See Global - CLI.
oam– Operations and Maintenance objects. See Operations and Maintenance (CLI).
profiles– Profiles of configuration shared by multiple objects. See Profiles - CLI.
system– System-level configuration. See System - CLI.
show operation displays the following objects and their attributes and is often used with
set operation (see above) to view results of provisioning activities.
addressContext– Objects scoped to a specific IP addressing domain.
details– Show details.
displaylevel– Use to define the level (1-64) of detail to show.
global– Global objects that are applicable Node wide.
oam– Operations and Maintenance objects.
profiles– Profiles of configuration shared by multiple objects.
system– System-level configuration.
status command displays the status of all users currently logged into CLI.
top operation is used to exit to the top level. In Edit mode, the
top command takes you to the top most level of CLI commands from any level.
up operation is used to exit one level of configuration. In Edit mode, the
up command takes you to one level up.