Skip to end of metadata
Go to start of metadata

In this section:

 

Use this object to configure Policy data for this SIP Trunk Group.

Note

As a best practice, always use UPPERCASE for trunk group names.

 

Command Syntax

% set addressContext <name> zone <name> sipTrunkGroup <name> policy
	callRouting elementRoutingPriority <ERP profile name>
	carrier <serving carrier code>
	country <country code>
	digitParameterHandling 
		egressDmPmRule <rule>
		ingressDmPmRule <rule>
		numberingPlan <numbering plan>
	featureControlProfile <profile name>
	ingress
		flags
			hdPreferredRouting <disable | enable>
  			hdSupportedRouting <disable | enable> 
			nonZeroVideoBandwidthBasedRoutingForH323 <disable | enable>
			nonZeroVideoBandwidthBasedRoutingForSip <disable | enable>
	ipSignalingPeerGroup <name>
	localizationVariant <generic | japan | northAmerica>
	media <packetServiceProfile |  toneAndAnnouncementProfile>
	preferredIdentity <disable | enable>
    services classOfService <COS profile name>
	signaling 
		ipSignalingProfile <profile name>
		signalingProfile <profile name>
	sipDomain <domain name>
	tgIPVersionPreference <both-ipv4-and-ipv6 | ipv4-only | ipv6-only> 

Command Parameters

SIP Trunk Group Policy Parameters

Table : SIP Trunk Group Policy Parameters

ParameterDescription
callRoutingRoute a call or request to the next-hop entity.
  • elementRoutingPriority – Element Routing Priority Profile name.
carrierThe serving carrier code.
countryThe serving country code.
digitParameterHandling

Use this object to specify digit parameter handling for this trunk group for this trunk group. (See Digit Parameter Handling Parameters table below for details).

featureControlProfile 

The name of the Feature Control Profile to associate with this trunk group.

NOTE: The featureControlProfile associated with this sipTrunkGroup can be replaced with a different featureControlProfile, if desired. However, deleting a featureControlProfile from a sipTrunkGroup object can cause call failures.

ingress flags

Use this parameter to configure the following route prioritization flags for this ingress trunk group. (See Ingress Flags table below for details)

ipSignalingPeerGroupThe name of the IP Signaling Peer Group to associate with this trunk group.
localizationVariant

Specifies the parameters and controls used for localization variant for this trunk group.

  • generic
  • japan
  • northAmerica
mediaSelect the profile associated with media policy for this SIP trunk group.
  • packetServiceProfile
  • toneAndAnnouncementProfile

preferredIdentity

 This flag is used to populate the originating identity (P-Asserted-Identity, From, Remote-Party-Identity headers) for calls initiated by any of the AoRs in the group. 

The options are:

  • enable
  • disable (default)

When this flag is enabled, the configured Preferred Identity is used to populate the originating identity of (From, Contact, P-Asserted-Identity, Remote-Party-Identity, Preferred-Identity) headers of the egress INVITE.

When this flag is enabled, the configured Preferred Identity is not used to populate any of the originating identity of (From, Contact, P-Asserted-Identity, Remote-Party-Identity, Preferred-Identity) headers of the egress INVITE.

services

The service associated with various enhanced services and features for this SIP trunk group.

  • classOfService <CoS profile name>
signaling

Identifies the parameters controlling the specifics of the SIP signaling for this SIP trunk group.

  • ipSignalingProfile – IP Signaling Profile name.
  • signalingProfile – Signaling Profile name.
sipDomain

The domain string used when SIP signaling requires a configured domain name.

tgIPVersionPreference

Use this flag to choose the IP address preference on the ingress Trunk Group. 

  • both-ipv4-and-ipv6 (default)
  • ipv4-only
  • ipv6-only

 

Digit Parameter Handling Parameters

Table : Digit Parameter Handling Parameters

ParameterDescription
egressDmPmRule

The name of Digit Manipulation and Parameter Manipulation profile applied at the egress.

  • PAI_AND_FROM_HEADER
  • PAI_DISPLAY_NAMES_1_NTL
  • PAI_SIP_DSPNAME_CLG_NAM
  • PAI_TEL_DSPNAME_GN_CPN
  • PRFX_TO_HEADER_CDPN_NTL
  • PRFX_TO_HEADER_GDPN_NTL
  • PRFX_TO_HEADER_OCN_NTL
  • SIP_ADD_PLUS    
  • SIP_REMOVE_CLG81 
  • SIP_REMOVE_PLUS1
  • SIP_REMOVE_PLUS39  
  • SIP_REMOVE_PLUS44  
  • SIP_REMOVE_PLUS49   
  • SIP_REMOVE_PLUS52    
  • SIP_REMOVE_PLUS81
  • SIP_REMOVE_PLUS86   
  • SIP_REMOVE_PLUS91
ingressDmPmRule  

The name of Digit Manipulation and Parameter Manipulation profile applied at the ingress. 

  • PAI_AND_FROM_HEADER
  • PAI_DISPLAY_NAMES_1_NTL
  • PAI_SIP_DSPNAME_CLG_NAM
  • PAI_TEL_DSPNAME_GN_CPN
  • PRFX_TO_HEADER_CDPN_NTL
  • PRFX_TO_HEADER_GDPN_NTL
  • PRFX_TO_HEADER_OCN_NTL
  • SIP_ADD_PLUS         
  • SIP_REMOVE_CLG81
  • SIP_REMOVE_PLUS1
  • SIP_REMOVE_PLUS39  
  • SIP_REMOVE_PLUS44   
  • SIP_REMOVE_PLUS49   
  • SIP_REMOVE_PLUS52
  • SIP_REMOVE_PLUS81
  • SIP_REMOVE_PLUS86 
  • SIP_REMOVE_PLUS91
numberingPlan

The name of the Numbering Plan profile.

  • CHINA_NUM_PLAN
  • GENERIC_NUM_PLAN
  • GERMANY_NUM_PLAN
  • INDIA_NUM_PLAN
  • ITALY_NUM_PLAN
  • JAPAN_NUM_PLAN
  • MEXICO_NUM_PLAN
  • NANP_ACCESS
  • UK_NUM_PLAN

Ingress Flags

Table : Ingress Flags

ParameterDescription
hdPreferredRouting

Enable flag on ingress trunk group to use PSX HD Preferred Routing strategy.

  • disable (default)
  • enable

NOTE: When this flag is enabled, the "nonZeroVideoBandwidthBasedRouting..." flags are disabled. Do not use this flag on Egress trunk groups.

hdSupportedRouting

Enable flag on ingress trunk group to use PSX HD Supported Routing strategy.

  • disable (default)
  • enable

NOTE: When this flag is enabled, the "nonZeroVideoBandwidthBasedRouting..." flags are disabled. Do not use this flag on Egress trunk groups.

nonZeroVideoBandwidthBasedRoutingForH323 

Enable this flag on ingress trunk group to give priority to routes with non-zero video bandwidth in H.323 video calls.

  • disable (default)
  • enable
nonZeroVideoBandwidthBasedRoutingForSip

Enable this flag on ingress trunk group to give priority to routes with non-zero video bandwidth in SIP video calls.

  • disable
  • enable (default)

INFO: See PSX Manager documentation for details of these features.