Skip to end of metadata
Go to start of metadata

In this section:

 

Accounting

Command Syntax

> show table oam accounting
	admin
		earlyAttemptState
		eventAcctMethods
		eventAcctPsxInfoState
		eventAcctState
		generationMode
		intermediateAcctInterval
		intermediateAcctMode
		intermediateAcctState 
		intermediateLongDurGenTime 
		intermediateLongDurThreshold 
		intermediateTrapState 
		maxRecordSequenceNum 
		populateIpTgFarEndSwitchType 
		populateNonPortedLnpNumbers 
		populateRemoteGsxInfoState 
		secondStageInheritFirstStage
		sendEgressCdrInfoOnReceipt
		startAcctState
	cdrServer
		admin
			type
			ipAddress
			cdrPort
			useSshKeyFile
			username
			password
			path
			filePrefix
			filePostfix
			connectionTimeout
			transferTimeout
			bufferSize
		status <primary or secondary>
			failedTransfers
			pendingTransfers
			progress 
			state
			successfulTransfers
	radius
		accountingAdmin
			failoverPolicy
			maxErrorRate 
			maxNoResponseTime 
			maxPacketRetryCount 
			maxQueuedPacketsInMemory 
			nasIdentifier
			nasIpAddress 
			radiusUserDetails
            sendNasIdentifier
			sendNasIpAddress
			state
		radiusServer
		radiusServerStatus

Command Parameters

Table : Shared Accounting Parameters - 'show status oam' and 'show table oam'

Parameter

Description

admin

Call CDR configuration.

  • earlyAttemptState – Identifies whether early ATTEMPT accounting is enabled or disabled.
  • eventAcctMethods – Log event records for the methods specified in the configuration.

  • eventAcctPsxInfoState – EVENT records relating to PSX are generated if enabled.

  • eventAcctState – EVENT records are generated if enabled.

  • generationMode – Identifies the accounting generation mode for the node.
  • intermediateAcctInterval – Identifies the Intermediate Accounting Interval in seconds
    NOTE: this object is only applicable when sonusAcctIntAcctMode is set to "interval(1)".
  • intermediateAcctMode – Identifies the intermediate record generation mode for the node.
  • intermediateAcctState – Identifies whether Intermediate Accounting is Enabled or Disabled for the Node
  • intermediateLongDurGenTime – Octet string that identifies the GMT time to generate Telcordia Long Duration accounting records.
  • intermediateLongDurThreshold – Identifies the Accounting Intermediate Records Duration in hours.
  • intermediateTrapState – Identifies whether a trap will be generated whenever an INTERMEDIATE record is generated.
  • maxRecordSequenceNum – Specifies the maximum record sequence number for logging the CDR records.
  • populateIpTgFarEndSwitchType Specifies whether or not Ingress Far End Switch Type is used to passed down from the PSX the IP trunk group for SIP ingress calls.
  • populateNonPortedLnpNumbers – Specifies whether or not to populate the Called Number Before Translation field in the accounting record under the following conditions:
    1) for a number for which an LNP lookup was performed
    2) the lookup indicated that the number has not been ported.
  • populateRemoteGsxInfoState - Identifies whether a destination SBC propagates its billing data to originating GSX/SBC for GW-GW calls.
  • secondStageInheritFirstStage - This indicates whether or not second stage accounting records for two-stage calls inherit fields from the first stage call.
  • sendEgressCdrInfoOnReceipt - This indicates whether or not to send the egress CDR info immediately after receiving and processing it.
  • startAcctState - Identifies whether Start Accounting is enabled or disabled for the node.
cdrServer

Configuration for external CDR servers.

  • admin (not available with 'show status' command)
    • type
    • ipAddress
    • cdrPort
    • useSshKeyFile
    • username
    • password
    • path
    • filePrefix
    • filePostfix
    • connectionTimeout
    • transferTimeout
    • bufferSize
    • status
    • type
    • state
    • progress
    • successfulTransfers
    • failedTransfers
    • pendingTransfers
radius

Configuration for external Radius servers. 

  • accountingAdminradiusServer
    • failoverPolicy
    • maxErrorRate
    • maxNoResponseTime
    • maxPacketRetryCount
    • maxQueuedPacketsInMemory
    • nasIdentifier
    • nasIpAddress
    • radiusUserDetails
    • sendNasIdentifier
    • sendNasIpAddress
    • state
    • radiusServerStatus

Alarms

Command Syntax

> show table oam alarms
	ethernetCrcErrAlarm
	ethernetCrcErrAlarmStatus
	ipPolicingAlarmAdmin
		majorAlarmMode
		majorAlarmProfileName
		minorAlarmMode
		minorAlarmProfileName
	ipPolicingAlarmStatus
		aclAlarmDuration 
		aclAlarmLevel 
		aclDiscardRate 
		aclPacketsAccepted 
		aclPacketsDiscarded 
		aggregateAlarmDuration 
		aggregateAlarmLevel 
		aggregateDiscardRate 
		aggregatePacketsAccepted 
		aggregatePacketsDiscarded 
		arpAlarmDuration 
		arpAlarmLevel 
		arpDiscardRate 
		arpPacketsAccepted 
		arpPacketsDiscarded 
		badEthernetIpHeaderAlarmDuration 
		badEthernetIpHeaderAlarmLevel 
		badEthernetIpHeaderDiscardRate 
		badEthernetIpHeaderPacketsDiscarded 
		discardRuleAlarmDuration 
		discardRuleAlarmLevel 
		discardRuleDiscardRate 
		discardRulePacketsDiscarded 
		ipSecDecryptAlarmDuration 
		ipSecDecryptAlarmLevel 
		ipSecDecryptDiscardRate 
		ipSecDecryptPacketsDiscarded 
		mediaAlarmDuration 
		mediaAlarmLevel 
		mediaDiscardRate 
		mediaPacketsDiscarded 
		rogueMediaAlarmDuration 
		rogueMediaAlarmLevel 
		rogueMediaDiscardRate 
		rogueMediaPacketsDiscarded
        srtpDecryptAlarmDuration
        srtpDecryptAlarmLevel
        srtpDecryptDiscardRate
        srtpDecryptPacketsDiscarded 
		uFlowAlarmDuration 
		uFlowAlarmLevel
		uFlowDiscardRate
		uFlowPacketsAccepted
		uFlowPacketsDiscarded
	mediaSrtpErrAlarm
	mediaSrtpErrAlarmStatus

Command Parameters

Table : Shared Alarm Parameters - 'show status oam' and 'show table oam'

Parameter

Description

ethernetCrcErrAlarm This table contains Ethernet CRC error alarm configuration.
ethernetCrcErrAlarmStatus

This table contains the Ethernet CRC error alarm status, with following fields:

  • <interface name>
  • currentErrRate
  • maxErrRate
  • totalCrcErrors
  • numAlarmsRaised
  • currentAlarmState
ipPolicingAlarmAdmin

This table contains system policer alarm configuration.

  • majorAlarmMode
  • majorAlarmProfileName 
  • minorAlarmMode 
  • minorAlarmProfileName
ipPolicingAlarmStatus

This table contains system policer alarm status. 

  • aclAlarmDuration 
  • aclAlarmLevel 
  • aclDiscardRate 
  • aclPacketsAccepted 
  • aclPacketsDiscarded 
  • aggregateAlarmDuration 
  • aggregateAlarmLevel 
  • aggregateDiscardRate 
  • aggregatePacketsAccepted 
  • aggregatePacketsDiscarded 
  • arpAlarmDuration 
  • arpAlarmLevel 
  • arpDiscardRate 
  • arpPacketsAccepted 
  • arpPacketsDiscarded 
  • badEthernetIpHeaderAlarmDuration 
  • badEthernetIpHeaderAlarmLevel 
  • badEthernetIpHeaderDiscardRate 
  • badEthernetIpHeaderPacketsDiscarded 
  • discardRuleAlarmDuration 
  • discardRuleAlarmLevel 
  • discardRuleDiscardRate 
  • discardRulePacketsDiscarded 
  • ipSecDecryptAlarmDuration 
  • ipSecDecryptAlarmLevel 
  • ipSecDecryptDiscardRate 
  • ipSecDecryptPacketsDiscarded 
  • mediaAlarmDuration 
  • mediaAlarmLevel 
  • mediaDiscardRate 
  • mediaPacketsDiscarded 
  • rogueMediaAlarmDuration 
  • rogueMediaAlarmLevel 
  • rogueMediaDiscardRate 
  • rogueMediaPacketsDiscarded
  • srtpDecryptAlarmDuration
  • srtpDecryptAlarmLevel
  • srtpDecryptDiscardRate
  • srtpDecryptPacketsDiscarded
  • uFlowAlarmDuration 
  • uFlowAlarmLevel
  • uFlowDiscardRate
  • uFlowPacketsAccepted
  • uFlowPacketsDiscarded
mediaSrtpErrAlarm

This table contains Media SRTP Authorization error alarm configuration.

mediaSrtpErrAlarmStatus

This table contains the Media SRTP authorization error alarm status, with following fields:

  • <system name>
  • currentErrRate
  • maxErrRate
  • totalSrtpErrors
  • numAlarmsRaised
  • currentAlarmState

EMA

Command Syntax

> show table oam ema clientAuthMethod

Command Parameter

Table : EMA Parameter - 'show table oam' only

Parameter

Description

clientAuthMethod Show EMA current setting of client authorization method.

Event Log

Command Syntax

> show table oam eventLog
	confdDebugLevel
	dataAgentAdmin
	dataAgentStatus
	filterAdmin
	filterStatus
	memusage
	platformAuditLogs
	platformRsyslog
    subsystemAdmin
	typeAdmin
	typeStatus

Command Parameters

Table : Shared Event Log Parameters - 'show status oam' and 'show table oam'

Parameter

Description

confdDebugLevelCurrent debug level for ConfD components.

dataAgentAdmin

Configuration for sending logs to a remote data warehouse.
dataAgentStatusStatus of the remote data warehouse.
filterAdminEvent Log Class Filter configuration table per card, with following fields (not available for 'show status' command) :
  • ceName
  • type – event type
  • eventClass
  • level
  • state
filterStatus

Event Log Class Filter status table per card, with following fields: 

  • ceName
  • type – event type
  • eventClass
  • eventsFiltered – Number of events filtered for the associated event type and class.

memusage

Process memory usage logging controls.
platformAuditLogs

Platform audit logs configuration.

  • state – Administrative state of platform audit logging.

Note: Not availiable for 'show status' command.

platformRsyslog

Syslog configuration for platform Linux logs, with the fields:

  • syslogState 
  • servers (table) 
  • linuxLogs (table) 

Note: Not available for 'show status' command.

subsystemAdmin

Subsystem Event Logging configuration table, with the fields (not available for 'show status' command):

  • ceName
  • systemId
  • infoLogState
  • minEventId
  • maxEventId
typeAdmin

Event Log configuration table for configuration items related to each Event Log type, with following fields (not available for 'show status' command):

  • type
  • state
  • fileCount
  • fileSize
  • messageQueueSize
  • saveTo
  • filterLevel
  • rolloverStartTime
  • rolloverInterval
  • rolloverType
  • rolloverAction
  • fileWriteMode
  • syslogState
  • renameOpenFiles
  • diskThrottleLimit
  • eventLogValidation
  • serverNo
    • syslogRemoteHost
    • syslogRemoteProtocol
    • syslogRemotePort
typeStatus 

Event Log status table for status items related to each Event Log type, with following fields:

  • type
  • currentFile
  • fileRecords
  • fileBytes
  • totalFiles
  • totalFileBytes
  • filesDropped
  • nextRollover
  • logDestination
  • lastFileDrop
  • infoLevelLoggingDisabled

Local Auth

Command Syntax

> show table oam localAuth 
	user
	userStatus 

Command Parameters

Table : Shared Local Auth Parameters - 'show status oam' and 'show table oam'

Parameter

Description

user

AAA services management, with following fields:

  • name – User name.
  • group – The group that the user is a member of.
  • accountAgingState – The state of account expiry for the user.

  • interactiveAccess – Whether the user is allowed to access interactive interfaces like CLI/EMA.

  • m2mAccess – Whether the user is allowed to access machine to machine interfaces like REST.

  • passwordAgingState – The state of password expiry for the user.

  • passwordLoginSupport – Whether the user is allowed to login using password.

userStatus

Current status of the specified user, with following fields:

  • name – User name.
  • currentStatus – Current status of the user account.
  • userId – User ID number.

Radius Authentication

Command Syntax

> show table oam radiusAuthentication
	radiusServer
	radiusStatus
	retryCriteria

Command Parameters

Table : CLI Statistics Details for 'show status'

ParameterDetails

radiusServer

Displays RADIUS server name of each server. The following field is included.

  •  radiusServer – Name of radius server
radiusStatus

RADIUS server status details. The following fields are included.

  • status –  Either available or unavailable
  • availableAt – The time when the server is automatically put back into 'available' state.

Table : CLI Statistics Details for 'show table'

ParameterDetails

radiusServer

RADIUS server configuration details of each server. The following field is included.

  • serverName – RADIUS server name
  • priority – The order the SBC uses to attempt RADIUS authentication. The RADIUS server with the lowest priority is contacted first.
  • state – Operational state of the RADIUS server.
  • radiusServerIp – IPv4 address of the RADIUS server.
  • radiusServerPort – The RADIUS server port to which the SBC sends the request.
  • radiusNasIp – IPv4 address of the SBC to send in ACCESS_REQUEST
  • radiusSharedSecret – The shared secret used to encrypt the data exchanged between SBC and RADIUS server.
  • mgmtInterfaceGroup – Name of the Management Interface Group to connect to this RADIUS server.
radiusStatus

RADIUS server status details. The following fields are included.

  • serverNameId – RADIUS server name
  • status – Either available or unavailable
  • availableAt – The time when the server is automatically put back into 'available' state.
retryCriteria

 RADIUS server Retry criteria settings. The following fields are included.

  • retryTimer – Time in milliseconds before the SBC attempts another authentication request.
  • retryCount – Number of retries the SBC uses to attempt authentication.
  • oosDuration – Time in minutes the RADIUS server remains out of service after a timeout.

SNMP

Command Syntax

> show table oam snmp
	community engineId
	trapTarget
		ipAddress
		port
		state 
		trapType

Command Parameters

Table : Shared SNMP Parameter - 'show status oam' and 'show table oam'

Parameter

Description

community

This table contains SNMP community information.

communityString

This table contains SNMP community strings used in a SNMP request, with following fields:

  • snmpCommunityIndex
  • snmpCommunityName

localEngineId

SNMPv3 SNMP-USER-BASED-SM-MIB usmUserEngineID and SNMP-COMMUNITY-MIB snmpCommunityContextEngineID

securityLevel

SNMPv3 SNMP-VIEW-BASED-ACM-MIB vacmAccessSecurityLevel for all users in model 0 and 3.

trapTarget

Trap target configuration details, with following fields:

  • name
  • ipAddress
  • port
  • trapType
  • targetUsername
  • targetSecurityLevel
  • state
users

Auth key and Priv key details for each user, with following fields:

  • username
  • group
  • authProtocol
  • authKey
  • privProtocol
  • privKey
version

SNMP version currently supported.

Traps

Command Syntax

> show table oam traps
	admin <traps>
	dspAdmin
		callFailureTrap lackdsp
			interval
			threshold
		dspAvailabilityTrap
			allThreshold
			g711PacketThreshold
			g726Threshold
			g729Threshold

Command Parameters

Table : Traps Parameters - 'show table oam' only

Parameter

Description

admin

The sonusTrapTable identifies the SNMP notifications that this node supports.

  • <trap name>
  • priorityLevel – Lists any user-defined priority levels overriding the default pre-compiled level.

  • state – Determines if this SNMP trap is transmitted to any management client.

dspAdmin  

DSP resource usage trap configuration.

  • callFailureTrap lackdsp– Trap configuration for Call Failure due to no DSP.
    • interval – Indicates the time interval for the threshold of call failure due to lack of DSP pad.

    • threshold – Indicates the number of call failure due to lack of DSP pad threshold.

  • dspAvailabilityTrap– DSP Availability trap threshold configuration.
    • allThreshold – Indicates the percentage DSP Availability threshold for all types.

    • g711PacketThreshold – Indicates the percentage of G711 Packet type DSP Availability threshold.

    • g726Threshold – Indicates the percentage of G726 type DSP Availability threshold.

    • g729Threshold – Indicates the percentage of G729 type DSP Availability threshold.

 

Command Example

 To display status of OAM SNMP objects:

> show status oam snmp community engineId 
engineId 80:00:0b:3f:03:00:10:6b:02:c7:ef; 

To display the status of OAM Eventlog objects:

> show status oam eventLog typeStatus security 
currentFile 1000006.SEC; 
fileRecords 6; 
fileBytes 986; 
totalFiles 31; 
totalFileBytes 10955; 
memoryRecords 0; 
memoryBytes 0; 
filesDropped 0; 
memoryDropped 0; 
nextRollover 0; 
logDestination localDisk; 
lastFileDrop 0000-00-00T00:00:00Z; 
lastMemoryDrop 0000-00-00T00:00:00Z; 

Error Messages

When NP 0 error counter messages are received in the DBG logs, the Ethernet Switch configuration (Datalink Device L2) is checked. If the Switch is overloaded with traffic,

  • The total drop count on the particular Interface on the Switch must be checked.
  • The Switch side configuration must be corrected.

Every Switch vendor has their own command to display the drop counts. Therefore, the respective document must be checked to check the drop counts.

 

  • No labels