Skip to end of metadata
Go to start of metadata

REST API Method: POST /rest/fxocard/{identifier}/telcofxoport/{identifier}

Modifies a FXO Port given a specific ID.

URL:

https://192.168.0.111/rest/fxocard/{identifier}/telcofxoport/{identifier}

HTTP Method

POST

Requires Authentication:

true

Parameters

Parameter Name Required Service Affecting Data Type Default Value Possible Values Description
ConfigIEStateNoYesEnum1Possible values:
  • 0 - esDISABLED
  • 1 - esENABLED
Specifies the Administrative State of the resource.
PortNameYesNostringnone128 - Max Length Specifies the string name of the Port.
PortAliasNoNostringnone20 - Max Length Specifies an alias name for the port for easy identification.
PortDescriptionNoNostringnone64 - Max Length Specifies a description for easy identification when being selected in Signaling Groups
RxGainYesYesint6Possible values:
  • -10 - Minimum
  • 10 - Maximum
Specifies a relative gain adjustment in decibels based on the country profile selected.
TxGainYesYesint0Possible values:
  • -10 - Minimum
  • 10 - Maximum
Specifies a relative gain adjustment in decibels based on the country profile selected.
CountryYesYesint33 Specifies the country profile to be used. One of the following: Australia (1), Austria (2), Belgium (3), Brazil (4), China (5), Czech Republic (6), Denmark (7), Finland (8), France (9), Germany (10), Switzerland (11), Greece (12), Hungary (13), India (14), Italy (15), Japan (16), Korea (17), Mexico (18), Netherlands (19), New Zealand (20), Nigeria (21), Norway (22), Portugal (23), Russia (24), Saudi Arabia (25), Slovakia (26), South Africa (27), Spain (28), Sweden (29), Taiwan (30), Turkey (31), United Kingdom (32), United States (33). Must be within the range of 1 to 33, 33 being the default.
RingValidationNoNoEnum1Possible values:
  • 0 - btFalse
  • 1 - btTrue
Specifies whether ring validation is to be enabled or disabled by the analog FXO port.
MaxRingFrequencyYesYesint50Possible values:
  • 7 - Minimum
  • 250 - Maximum
Specifies the upper frequency limit used for ring validation by analog FXO port.
MinRingFrequencyYesYesint15Possible values:
  • 7 - Minimum
  • 250 - Maximum
Specifies the lower frequency limit used for ring validation by analog FXO port.
RingDetectionThresholdYesYesEnum0Possible values:
  • 0 - prdt17dB
  • 1 - prdt24dB
  • 2 - prdt50dB
Specifies the ring detection threshold of analog FXO port.
ImpedanceYesYesint0Possible values:
  • 0 - Minimum
  • 15 - Maximum
This parameter matches the impedance presented by local TELCO analog FXO line. The following are valid values: 0-600 ohms 1-900 ohms 2-270 ohms + (750 ohms || 150 nF) and 275 ohms + (780 ohms || 150 nF) 3-220 ohms + (820 ohms || 120 nF) and 220 ohms + (820 ohms || 115 nF) 4-370 ohms + (620 ohms || 310 nF) 5-320 ohms + (1050 ohms || 230 nF) 6-370 ohms + (820 ohms || 110 nF) 7-275 ohms + (780 ohms || 115 nF) 8-120 ohms + (820 ohms || 110 nF) 9-350 ohms + (1000 ohms || 210 nF) 10-200 ohms + (680 ohms || 100 nF) 11-600 ohms + 2.16 uF 12-900 ohms + 1 uF 13-900 ohms + 2.16 uF 14-600 ohms + 1 uF 15- Global Impedance
LocalLoopTypeYesYesint0Possible values:
  • 0 - Minimum
  • 7 - Maximum
Specifies the EIA line model used to match the local loop to which the FXO analog port connects. The value representations as follows: 0-EIA Type 0 1-EIA Type 1 2-EIA Type 2 3-EIA Type 3 4-EIA Type 4 5-EIA Type 5 6-EIA Type 6 7-EIA Type 7
FXOCalibrationTimeStampNoNoint0 Time stamp when last time the FXO line was calibrated to auto detect Impedence and Local loop type

Helpful Tip

The POST can contain either only the attributes that are being updated, or the full set of attributes for the resource

  • No labels