Skip to end of metadata
Go to start of metadata

REST API Method: PUT /rest/enmsignalingprofile/{identifier}

Creates a CAS E and M Signaling Profile given a specific ID.

Note

The CAS E and M Signaling Profile identifier can only be within the range 10001-15000 (inclusive)

URL:

https://192.168.0.111/rest/enmsignalingprofile/{identifier}

HTTP Method

PUT

Requires Authentication:

true

Parameters

Parameter Name Required Service Affecting Data Type Default Value Possible Values Description
DescriptionNoNostringnone64 - Max Length A description of the profile.
OrientationYesNoEnum0Possible values:
  • 0 - eCas_User
  • 1 - eCas_Network
Set the CAS signaling orientation. Set to User if connected to a PSTN; Set to Network if connected to a PBX.
IncomingStartDialYesNoEnum0Possible values:
  • 0 - eCas_EmWinkStart
  • 1 - eCas_EmImmediateDialing
Used to configure the type of E&M protocol for incoming calls.
OutgoingStartDialYesNoEnum0Possible values:
  • 0 - eCas_EmWinkStart
  • 1 - eCas_EmImmediateDialing
Used to configure the type of E&M protocol for outgoing calls.
DTMFOnTimeYesNoint100Possible values:
  • 45 - Minimum
  • 250 - Maximum
Used to set how long DTMF tones are on. The value specifies the time in milliseconds.
DTMFOffTimeYesNoint100Possible values:
  • 45 - Minimum
  • 250 - Maximum
Used to set how long DTMF tones are off. The value specifies the time in milliseconds.
InterDigitTimeoutYesNoint500Possible values:
  • 250 - Minimum
  • 30000 - Maximum
Used to set the timeout time between dialed numbers. The value specifies the timeout period in milliseconds.

  • No labels