Skip to end of metadata
Go to start of metadata

About this Resource

The DS1 Port Group resource allows the user to configure the SBC Edge system's DS1 port types. It is only applicable on systems which include DS1 interfaces.

REST API Methods for this Resource

Resource Schema

Parameters

Configuration

Parameter Name Required Service Affecting Data Type Default Value Possible Values Description
CardOneGroupOneTypeYesYesisdn_tip:PORT_PHYSICAL_TYPE Identifies the port type for ports 1:1-1:4, if interface card 1 is a 4-port or 8-port card. If interface card 1 is a 2-port card, then this identifies the port type for ports 1:1 and 1:2. If the DS1 type of these ports is not being modified then this attribute may be omitted from the request.

This is applicable only in SBC 2000.

CardOneGroupTwoTypeYesYesisdn_tip:PORT_PHYSICAL_TYPE Identifies the port type for ports 1:5-1:8, if interface card 1 is an 8-port card. If interface card 1 is a 2-port or 4-port card, then this is not applicable. If the DS1 type of these ports is not being modified then this attribute may be omitted from the request.

This is applicable only in SBC 2000.

CardTwoGroupOneTypeYesYesisdn_tip:PORT_PHYSICAL_TYPE Identifies the port type for ports 2:1-2:4, if interface card 2 is a 4-port or 8-port card. If interface card 2 is a 2-port card, then this identifies the port type for ports 2:1 and 2:2. If the DS1 type of these ports is not being modified then this attribute may be omitted from the request.

This is applicable only in SBC 2000.

CardTwoGroupTwoTypeYesYesisdn_tip:PORT_PHYSICAL_TYPE Identifies the port type for ports 2:5-2:8, if interface card 2 is an 8-port card. If interface card 2 is a 2-port or 4-port card, then this is not applicable. If the DS1 type of these ports is not being modified then this attribute may be omitted from the request.

This is applicable only in SBC 2000.

CardSevenTypeYesYesisdn_tip:PORT_PHYSICAL_TYPE Identifies the port type for ports 7:1 and 7:2. If the DS1 type of these ports is not being modified then this attribute may be omitted from the request.

This is applicable only in SBC 1000.

CardEightTypeYesYesisdn_tip:PORT_PHYSICAL_TYPE Identifies the port type for port 8:1, if interface card 8 is present. If the DS1 type of this port is not being modified then this attribute may be omitted from the request.

This is applicable only in SBC 1000.

PortTypeYesYesisdn_tip:PORT_PHYSICAL_TYPE Identifies the port type to which all DS1 ports on the system should be configured. If this attribute is set then it will override all the individual card-and-group attributes, which will not need to be sent with the request. If you wish to use individual card-and-group settings, for example if you need some ports set to T1 and others to E1, then you must omit this attribute from the request.

This is applicable to both the SBC 1000 and 2000.