Skip to end of metadata
Go to start of metadata

About this Resource

Defines SBA or CCE Singleton Managed Object.

The SBA is setup by performing a set of actions in a specified order. Failing to follow the order can result in undersirable behavior. The setup steps are as follows:

Repeating any of the above actions once the setup is performed, might result in undesirable behavior. It is recommended that the SBA is re-initialized if the step has to be performed and the setup done again in the above order.

Any other action can be performed at any time once the SBA is setup without any implications.

The CCE is setup by performing a set of actions in a specified order. Failing to follow the order can result in undersirable behavior. The setup steps are as follows:

Repeating any of the above actions once the setup is performed, might require the CCE to be re-deployed.

Any other action can be performed at any time once the SBA is setup without any implications.

REST API Methods for this Resource

Resource Schema

Configuration

Parameter Name Required Service Affecting Data Type Default Value Possible Values Description
DHCPEnabledNoYesEnum1Possible values:
  • 0 - btFalse
  • 1 - btTrue
Enables Dynamic Host Configuration Protocol (DHCP) for network configuration. If DHCP is enabled, it overrides the IP address and DNS settings.
ipv4AddressNoYesstringnone16 - Max Length Specifies a manually configured IPv4 address for this ethernet port, when DHCP is not enabled.
ipv4NetmaskNoYesstringnone16 - Max Length Specifies the netmask for a manually configured IPv4 address on this ethernet port, when DHCP is not enabled.
ipv4GatewayNoYesstringnone16 - Max Length Specifies the default gateway for a manually configured IPv4 address on this ethernet port, when DHCP is not enabled.
RemoteDesktopEnabledNoNoEnum0Possible values:
  • 0 - btFalse
  • 1 - btTrue
Enables Remote Desktop for direct console login. This function is intended for administrator use only.
DNSServer1NoYesstringnone64 - Max Length Specifies a manually configured Domain Name Server address for IP name resolution. This server is used first for DNS requests. Applicable when DHCP is not enabled.
DNSServer2NoYesstringnone64 - Max Length Specifies a manually configured Domain Name Server address for IP name resolution. This server is used when the Preferred DNS server is slow or unreachable. Applicable when DHCP is not enabled.
AclEnableNoYesEnum1Possible values:
  • 0 - btFalse
  • 1 - btTrue
Enables the ASM Windows firewall.
ipv6AddressNoYesstringnone45 - Max Length Specifies a manually configured IPv6 address for this ethernet port.
ipv6PrefixLenNoYesint64Possible values:
  • 0 - Minimum
  • 128 - Maximum
Specifies the netmask prefix length for a manually configured IPv6 address on this ethernet port.
ipv6GatewayNoYesstringnone45 - Max Length Specifies the default gateway for a manually configured IPv6 address on this ethernet port.
Eth2ipv4DHCPEnabledNoYesEnum1Possible values:
  • 0 - btFalse
  • 1 - btTrue
Enables Dynamic Host Configuration Protocol (DHCP) for ASM Port 2 network configuration. If DHCP is enabled, it overrides the IP address and DNS settings.
Eth2ipv4AddressNoYesstringnone16 - Max Length Specifies a manually configured IPv4 address for the ASM Port 2, when DHCP is not enabled.
Eth2ipv4NetmaskNoYesstringnone16 - Max Length Specifies the netmask for a manually configured IPv4 address on the ASM Port 2, when DHCP is not enabled.
Eth2DNSServer1NoYesstringnone64 - Max Length Specifies a manually configured Domain Name Server address for IP name resolution. This server is used first for DNS requests. Applicable when DHCP is not enabled.
Eth2DNSServer2NoYesstringnone64 - Max Length Specifies a manually configured Domain Name Server address for IP name resolution. This server is used when the Preferred DNS server is slow or unreachable. Applicable when DHCP is not enabled.
Eth2ipv6AddressNoYesstringnone45 - Max Length Specifies a manually configured IPv6 address on the ASM Port 2.
Eth2ipv6PrefixLenNoYesint64Possible values:
  • 0 - Minimum
  • 128 - Maximum
Specifies the netmask prefix length for a manually configured IPv6 address on the ASM Port 2.
Eth2ipv4GatewayNoYesstringnone16 - Max Length Specifies the default gateway for a manually configured IPv4 address on the ASM Port 2, when DHCP is not enabled.
Eth2ipv6GatewayNoYesstringnone45 - Max Length Specifies the default gateway for a manually configured IPv6 address on the ASM Port 2.
ProxyEnabledNoYesEnum0Possible values:
  • 0 - btFalse
  • 1 - btTrue
Enables Proxy for network configuration.
ProxyAddressNoYesstringnone45 - Max Length Specifies a proxy address.
ProxyPortNoNoint1 Specifies a proxy port.

Runtime

Parameter Name Description Data Type Possible Values
rt_NumEthPorts Displays the number of physical ethernet ports on the ASM module. int
rt_RDPEnabled This specifies if RDP is enabled on the ASM. EnumPossible values:
  • 0 - btFalse
  • 1 - btTrue
rt_AsmReachable Displays true/false if the ASM module is reachable through the SBC Edge management communication. EnumPossible values:
  • 0 - btFalse
  • 1 - btTrue
rt_MediationSvcState Displays the current status of the Mediation Service on the ASM. EnumPossible values:
  • 0 - bssRunning
  • 1 - bssStopped
  • 2 - bssStarting
  • 3 - bssStopping
  • 4 - bssNotAvailable
rt_RegistrarSvcState Displays the current status of the Registrar Service on the ASM. EnumPossible values:
  • 0 - bssRunning
  • 1 - bssStopped
  • 2 - bssStarting
  • 3 - bssStopping
  • 4 - bssNotAvailable
rt_SQLSvcState Displays the current status of the SQL Service on the ASM. EnumPossible values:
  • 0 - bssRunning
  • 1 - bssStopped
  • 2 - bssStarting
  • 3 - bssStopping
  • 4 - bssNotAvailable
rt_Domain Displays the Windows domain name (if joined) that the ASM belongs to. string
rt_HostName Displays the Windows host name of the ASM. string
rt_Licensed Displays whether the SBA or RBA has acquired a valid license. EnumPossible values:
  • 0 - btFalse
  • 1 - btTrue
rt_UpTime Displays the amount of time the ASM has been running. This value may differ from the SBC Edge's system up time. long
rt_UXComVersion Displays the version of the SBC Edge Communications Service running on the ASM string
rt_MediationVersion Displays the version of the Mediation Service running on the ASM string
rt_RegistrarVersion Displays the version of the Registrar Service running on the ASM string
rt_SQLVersion Displays the version of the SQL Service running on the ASM string
rt_WindowsVersion Displays the internal version number of the ASM Operating System. string
rt_WinCpuUsage Displays the current snapshot of the Windows overall CPU usage int
rt_MediationCpuTime Displays the number of seconds of CPU runtime that the Mediation Service on the ASM has used long
rt_RegistrarCpuTime Displays the number of seconds of CPU runtime that the Registrar Service on the ASM has used long
rt_SQLCpuTime Displays the number of seconds of CPU runtime that the SQL Service on the ASM has used long
rt_UXSBACpuTime Displays the number of seconds of CPU runtime that the SBC Edge Communications Service on the ASM has used. long
rt_WinMemFree Displays the amount of free memory that Windows currently reports long
rt_MediationMemUsage Displays the number of bytes of memory consumed by the Mediation Service on the ASM long
rt_RegistrarMemUsage Displays the number of bytes of memory consumed by the Registrar Service on the ASM long
rt_SQLMemUsage Displays the number of bytes of memory consumed by the SQL Service on the ASM long
rt_UXSBAMemUsage Displays the number of bytes of memory consumed by the SBC Edge Communications Service on the ASM long
rt_LoginNames Displays a list of users current logged onto the ASM. string
rt_DHCPEnabled Displays the Dynamip Host Configuration Protocol (DHCP) for network configuration setting. EnumPossible values:
  • 0 - btFalse
  • 1 - btTrue
rt_IPv4Address Displays the manually configured IPv4 address for this ethernet port, when DHCP is not enabled. string
rt_IPv4Netmask Displays the manually configured IPv4 address on this ethernet port, when DHCP is not enabled. string
rt_IPv4Gateway Displays the manually configured IPv4 address on this ethernet port, when DHCP is not enabled. string
rt_ReplicationUpToDate Displays whether the Lync Server Replica is up to date. EnumPossible values:
  • 0 - tsbUnknown
  • 1 - tsbTrue
  • 2 - tsbFalse
rt_ReplicationFQDN Displays the fully-qualified domain name of the Lync Server Replica. string
rt_ReplicationLastStatusReport Displays the date and time of the last status report from the Lync Server Replica. long
rt_ReplicationLastUpdateCreation Displays the date of the last update of the Lync Server Replica. long
rt_ReplicationProductVersion Displays the Service Version of the Lync Server Replica. string
rt_ImageDescription Displays the type of the ASM image running on the ASM. string
rt_UpdateState Displays the status of the Windows Update service. EnumPossible values:
  • 0 - ausUnknown
  • 1 - ausUpToDate
  • 2 - ausAvailable
  • 3 - ausInstalling
  • 4 - ausQuerying
  • 5 - ausErrorState
rt_PendingRestartNeeded Displays the need of a reboot for Windows Update. EnumPossible values:
  • 0 - tsbUnknown
  • 1 - tsbTrue
  • 2 - tsbFalse
rt_StatusText Displays the need of a reboot for Windows Update. string
rt_ReplicationErrors Displays additional information in case of failure during Replication . string
rt_QoEReportSuccess Displays the number of QoE reports successfully stored int
rt_QoEReportFailure Displays the number of QoE reports failed to be stored int
rt_AsmSupportMode Displays the current support mode of the ASM. EnumPossible values:
  • 0 - asmUnknown
  • 1 - asmServer
  • 2 - asmApplianceControlled
  • 3 - asmApplianceCertified
rt_GpoDetected Display the number of GPO currently applied on the ASM int
rt_QoEReportPending Displays the number of QoE reports pending to be stored int
rt_AsmLicensedFeature Displays the features licensed on the ASM using a binary word. The first bit reprensent the SBA license, the second bit represent the RBA license and the third bit represent the QOE license. int
rt_AsmNewestRollUp Displays the newest Ribbon Communications roll-up applied on the ASM. string
rt_VMMSSvcState Displays the current status of the Hyper-V Service on the ASM. EnumPossible values:
  • 0 - bssRunning
  • 1 - bssStopped
  • 2 - bssStarting
  • 3 - bssStopping
  • 4 - bssNotAvailable
rt_CCEVersion Displays the version of the CCE running on the ASM. string
rt_CCEVersionInstalled Displays the version of the CCE installed on the ASM. string
rt_CCEAutoMaintenance Displays the state of the CCE Maintenance Mode. EnumPossible values:
  • 0 - acusUnknown
  • 1 - acusNone
  • 2 - acusBitsUpdate
  • 3 - acusOsUpdate
  • 4 - acusAutoRecover
  • 5 - acusDeploying
rt_TlsVersion Displays the current TLS version enabled EnumPossible values:
  • 0 - atvTlsUnknown
  • 1 - atvTlsAllDisabled
  • 2 - atvTlsAllEnabled
  • 3 - atvTls1dot0Only
  • 4 - atvTls1dot2Only
rt_Eth2DHCPEnabled Displays the Dynamic Host Configuration Protocol (DHCP) for network configuration setting ASM port 2. EnumPossible values:
  • 0 - tsbUnknown
  • 1 - tsbTrue
  • 2 - tsbFalse
rt_Eth2IPAddress Displays the ASM Port 2 IP address. string
rt_Chassis_Version Indicates the SBC1000 chassis version.
  • v1 - SBC1000 with 2 ethernet ports.
  • v2 - SBC1000 with 3 ethernet ports.

This is applicable only for SBC 1000.

string
rt_ASM_ComputerModel Indicates the model of the ASM hardware. string
rt_ASM_ProcessorName Indicates the CPU name of the ASM. string
rt_ASM_ProcessorCPUs Indicates the number of CPUs present on the ASM. string
rt_ASM_ProcessorClockSpeed Indicates the clock speed of the ASM's CPU. string
rt_ASM_PhysicalMemory Indicates the amount of RAM present on the ASM. string
rt_ASM_BIOSManufacturer Indicates the manufacturer of the ASM's BIOS. string
rt_ASM_BIOSVersion Indicates the BIOS version of the ASM. string
rt_ASM_HDDSize Indicates the hard drive size on the ASM. string
rt_ASM_ImageType Indicates the software image type (SBA, RBA) running on the ASM. string
rt_PowerLED Indication of state of the chassis POWER LED - On or Off. EnumPossible values:
  • 0 - eLEDState_on
  • 1 - eLEDState_off
  • 2 - eLEDState_blink
rt_ReadyLED Indication of the state of the chassis READY LED - On or Off. EnumPossible values:
  • 0 - eLEDState_on
  • 1 - eLEDState_off
  • 2 - eLEDState_blink
rt_ASM_OsVersion Indicates the Windows version running on the ASM. string
rt_ASM_NumberEthernetPort Indicates the number of Ethernet ports activated on the ASM. string
rt_ASM_ImageOriginalCommsVersion Indicates the SbcComms version that was included on the current ASM Image. string
rt_ASM_WindowsEthernetMainMac Indicates the MAC Address of the ASM port 1. string
rt_ASM_WindowsEthernetSecMac Indicates the MAC Address of the ASM port 2. string

Inventory

Parameter Name Description Data Type Possible Values
Location The hardware module's location within the SBC. EnumPossible values:
  • 0 - rmLocation_Unknown
  • 1 - rmLocation_LineCard1
  • 2 - rmLocation_LineCard2
  • 3 - rmLocation_DSPCard1
  • 4 - rmLocation_DSPCard2
  • 5 - rmLocation_DSPCard3
  • 6 - rmLocation_DSPCard4
  • 7 - rmLocation_DSPCard5
  • 8 - rmLocation_DSPCard6
  • 9 - rmLocation_BITS_WAN
  • 10 - rmLocation_SFP
  • 11 - rmLocation_COMExpress
  • 12 - rmLocation_Mainboard
  • 13 - rmLocation_PSU1
  • 14 - rmLocation_PSU2
  • 15 - rmLocation_UX1000_Telco_1
  • 16 - rmLocation_UX1000_Telco_2
  • 17 - rmLocation_UX1000_Telco_3
  • 18 - rmLocation_UX1000_Telco_4
  • 19 - rmLocation_UX1000_Telco_5
  • 20 - rmLocation_UX1000_Telco_6
  • 21 - rmLocation_UX1000_DS1_Telco
  • 22 - rmLocation_UX1000_DS1_WAN
  • 23 - rmLocation_MAX
CardType The type of hardware module. EnumPossible values:
  • 0 - rmCardType_Unknown
  • 1 - rmCardType_DS1_2SPAN_LineCard
  • 2 - rmCardType_DS1_4SPAN_LineCard
  • 3 - rmCardType_DS1_8SPAN_LineCard
  • 4 - rmCardType_EX_LineCard
  • 5 - rmCardType_MSPD_C910_DaughterBoard
  • 6 - rmCardType_MSPD_C349_DaughterBoard
  • 7 - rmCardType_TI_6486_DaughterBoard
  • 8 - rmCardType_BITS_DaughterBoard
  • 9 - rmCardType_WAN_DaughterBoard
  • 10 - rmCardType_SFP_Daughterboard
  • 11 - rmCardType_COMExpress_Module
  • 12 - rmCardType_MainBoard
  • 13 - rmCardType_Chassis
  • 14 - rmCardType_PSU
  • 15 - rmCardType_Not_Installed
  • 16 - rmCardType_Node
  • 17 - rmCardType_FXS_8PORT_LineCard
  • 18 - rmCardType_FXS_16PORT_LineCard
  • 19 - rmCardType_FXS_24PORT_LineCard
  • 20 - rmCardType_FXS_4PORT_Lower_DaughterBoard
  • 21 - rmCardType_FXS_4PORT_Upper_DaughterBoard
  • 22 - rmCardType_FXO_4PORT_Lower_DaughterBoard
  • 23 - rmCardType_FXO_4PORT_Upper_DaughterBoard
  • 24 - rmCardType_BRI_4PORT_DaughterBoard
  • 25 - rmCardType_DS1_1SPAN_DaughterBoard
  • 26 - rmCardType_DS1_2SPAN_DaughterBoard
  • 27 - rmCardType_FXS_4PORT_NR_Lower_DaughterBoard
  • 28 - rmCardType_MSPD_C346_DaughterBoard
  • 29 - rmCardType_MAX
Vendor The vendor who provided the hardware module. string
PartNumber The hardware module's part number. string
VersionNumber The hardware module's version number. string
MfgWeek The week that the hardware module was manufactured, as a two-digit string between 01 and 52. string
MfgYear The year that the hardware module was manufactured, as a two-digit string (e.g.: 2013 is returned as "13") string
SerialNumber The hardware module's serial number. string
LineCardLicenseType The type of line card license - Non-Licensed card will not require TDM port licenses, Licensed card will require TDM port licenses for additional ports to be activated. EnumPossible values:
  • 0 - rmLineCardLicenseType_Nonlicensed
  • 1 - rmLineCardLicenseType_Licensed
LineCardNumLicensedPorts The number of ports licensed for the TDM line card type. This is dependent on LineCardLicenseType. If the card is Licensed, the number of ports is equal to number of licenses, otherwise it is the maximum for that card type.. int
AsmOsLicenseType The version of ASM Operating System that is licensed by the factory. Additional license can be purchased, activated and reviewed through Ribbon licensing and license resource. EnumPossible values:
  • 0 - aoflUnknown
  • 1 - aoflWin2008R2
  • 2 - aoflWin2012R2
Status Indicates the hardware initialization state for this card. EnumPossible values:
  • 0 - rmStatus_None
  • 1 - rmStatus_Card_Idle
  • 2 - rmStatus_Card_Detected
  • 3 - rmStatus_Card_Activating
  • 4 - rmStatus_Card_Activated
  • 5 - rmStatus_Card_RemoveRequested
  • 6 - rmStatus_Card_Removing
  • 7 - rmStatus_Card_Removed
  • 8 - rmStatus_Card_Downloading
  • 9 - rmStatus_Card_Failed
  • 10 - rmStatus_Card_DisabledLongLoop
  • 11 - rmStatus_MAX
TotalSystemMemory Indicates the amount of RAM available in the system in MB. string