Skip to end of metadata
Go to start of metadata

The Sonus SBC 1000/2000 Web Interface includes a built-in step-by-step setup configuration wizard allowing end-users to quickly deploy Sonus SBC 1000/2000 and OCS 2007.

This functionality is accessible in the WebUI via the Tasks tab under Microsoft© UC Setup > OCS 2007 Setup.

Topology Overview

SIP Trunk is a popular alternative to PSTN connectivity via PRI. Sonus SBC 1000/2000 can be configured to connect an Enterprise's OCS environment to a SIP trunk using an automatic setup wizard as described in the section below.

Helpful Tip

Usage of the deployment wizard to configure the Sonus SBC 1000/2000 does not modify existing configuration. The wizard will simply add the new configuration elements to the Sonus SBC 1000/2000.

OCS 2007 Setup Field Configuration

Enter the scenario configuration details based on your deployment settings:

When you click the Apply on this final step, it may take up to 15 seconds before you receive a final confirmation status screen. During this time, no progress indicator will be shown, and it is recommended that you wait until the operation completes. This issue was resolved in Sonus SBC 1000/2000 software, SYM-8453.

Field Definitions

Scenario Information - Field Definitions

Scenario Description

Name describing the OCS setup.
(info) This value entered will be prefixed on all the Sonus SBC 1000/2000 configuration elements created by the Setup Wizard pertaining to this deployment.

Gateway Scenario

Select SIP Trunking for this deployment

SIP Properties - Field Definitions

No. of Channels

The number of SIP channels you would like the wizard to allocated in the SIP Signalling Group.
(warning) Make sure you have enough SIP licenses to account for the entered value.

Primary Mediation Server

The Pool name of the OCS Mediation Server

Port Number

The SIP Server Port number (via TCP) to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Primary Mediation Server

Use Secondary Mediation Server

Select enable if you wish to have a secondary Mediation Server configured

Border Element Server

The FQDN or IP address of the Session Border Controller service provider

Protocol

The IP protocol to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host

Port Number

The SIP Server Port number to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host

Use Secondary Border Element Server

Select enable if you wish to have a secondary Session Border Controller service provider configured