Skip to end of metadata
Go to start of metadata

How to Access MIBs

SNMP tables are cached for 30 seconds before new data is collected.

MIBS can be accessed through any MIB Browser (i.e. iReasoning). The MIB Browser enables you to view the MIBs from any device (such as the SBC 1000/2000).

MIBS Supported

In addition to the standard MIBs, the Sonus SBC 1000/2000 system supports the following MIBs.

  1. Sonus SBC 1000/2000 Objects MIB - This MIB file contains the following:
  • Sonus SBC 1000/2000 chassis information
  • Sonus SBC 1000/2000 Alarm Configuration Table
  • Sonus SBC 1000/2000 Active Alarm Table details
  • Sonus SBC 1000/2000 DSP Resource Table
  • Sonus SBC 1000/2000 DSX0 Config Table (augments the standard DSX0 Config Table)
  • Sonus SBC 1000/2000 Module Table

2. Sonus SBC 1000/2000 Call Statistics MIB - This MIB file contains the following:

  • Sonus SBC 1000/2000 system version information
  • Sonus SBC 1000/2000 Port Table(Sonus SBC 1000/2000 call statistics details)
  • Sonus SBC 1000/2000 Channel Status Table
  • Sonus SBC 1000/2000 Call Route Tables Table (a table of tables)
  • Sonus SBC 1000/2000 Call Route Table
  • Sonus SBC 1000/2000 Signaling Group Table
  • Sonus SBC 1000/2000 SIP Server Table

 3. Sonus SBC 1000/2000 Traps MIB - This MIB file lists the Sonus SBC 1000/2000 traps sent to the managers.

Standard MIB Support

Sonus SBC 1000/2000 also extends the standard interface table MIB to include partial support for the following:

IF MIB

The Sonus SBC 1000/2000 supports the IF MIB as described here:

  • The ifStack and ifRcvAddress tables list only the physical interfaces.

The ifIndex attribute inthe ifTable is interpreted as follows:

BitDescription
0-9Channel number
10-15Port number
16-17Reserved
18-21Card number
22-25Shelf number
26-29Unused
300 = Kernel, 1 = User. All Ethernet interfaces are 0 and DS1 are 1.
31No Used, always 0.

The kernel assigns ifIndex sequentially based on the order the interfaces are brought up.

DS0 MIB

The Sonus SBC 1000/2000 supports partial DS0 MIB support through the dsx0Configtable table. The DS0 MIB is based on RFC 2494.

DS1 MIB

The Sonus SBC 1000/2000 provides partial support for the DS1 MIB. The DS1 MIB is based on RFC 4805.

Host Resources MIB

The Sonus SBC 1000/2000 provides partial support for the Host Resources MIB. The Host Resources MIB is based on RFC 2790.

MIB File Downloads

The latest MIBs are available in Salesforce. See Sonus SBC 1000-2000 Download Center.