Skip to end of metadata
Go to start of metadata

The SBC supports IPv4 addresses for this feature; IPv6 is not supported.

To create an Entry in a Static ARP Table:

  1. In the WebUI, click the Settings tab.
  2. In the left navigation pane, go to Protocols > IP > Static ARP Tables.

Creating an Entry in a Static ARP Table

  1. Click the Create Static ARP Table Entry ( ) icon at the top of the Static ARP Table page.

  2. Enter an IP Address (IPv4 only).
  3. Enter a MAC Address.
  4. Click OK

The IP address (and subsequent MAC address) must belong to a device which is a member of a subnet defined for the SBC Edge.