The Hosts Table enables you to edit the /etc/hosts file through the WebUI or REST interface. Each line in the Hosts file contains one IP address (IPv4 or IPv6) and at least one FQDN/Host name/Domain name.
When you create a FQDN/Hostname entry in the Host Table, you have the option to enter an IP address to resolve the FQDN/Host name, or allow the SBC to dynamically resolve the FQDN/Host name. The Dynamic Refresh option allows dynamic resolution of the FQDN/Hostname, as well as provides auto-updates in case of dynamic IP changes.
Hosts File Example
The Hosts Table allows applications on the SBC 1000/2000, such as SIP Signaling Groups, AD, RADIUS, etc. to resolve FQDNs when a DNS server is not reachable. We recommend that only a few, very critical, host-IP pairs be stored on the SBC 1000/2000.
Another use-case is in a pre-deployment scenario in which an administrator would like to divert traffic by mapping the same FQDN to a different IP address. For example, a SBC 1000/2000can communicate with a Lync server under test before it is added to the production network, using the same FQDN, but with a different IP address.
Working with the Hosts Table
Access the Hosts Table:
- In the WebUI, click the Settings tab.
In the left navigation pane, go to Protocols > DNS > Hosts.
To delete an entry, select the checkbox next to the entry and then click the Delete () icon.
Changes to the Hosts Table are not dynamically applied. Reboot the SBC 1000/2000 following any modification to the Hosts Table.
ASM Behavior on Sonus SBC 1000/2000 Reboot Operation
- Sonus SBC 2000
- If the ASM is running, rebooting the SBC will cause the ASM to also reboot.
- If the ASM is shut down, rebooting the SBC will not restart the ASM.
- To bring the ASM back into operation, you must physically power off and power back on the SBC.
- Sonus SBC 1000 --- rebooting the SBC will not have an effect on the ASM.