Ribbon Documentation Portal will be unavailable Thursday February 2nd 2023 between 2:00 PM EST ~ 12:00 PM. More Info
Skip to end of metadata
Go to start of metadata

In this section:

This Best Practice includes instructions for configuring Ethernet Redundancy on an SBC 1000/2000, as well as on an SBC 1000/2000 for ASM and CCE.

For details on SBC Edge Ethernet Redundancy, refer to Managing Ethernet Ports.

Configure Ethernet Redundancy - Ethernet Port 1 for Pairing to Ethernet Port 3

  1. Access the WebUI.
  2. Access Node Interfaces > Ports  and select Ethernet 1.

  3. From the Frame Type drop down list, select Untagged.
  4. From Default Untagged VLAN drop down list, select Ethernet 1 VLAN.

    Ethernet 1

  5. From the Redundancy drop down list, select Failover.

    Failover Option

  6. From the Redundant Port drop down list, select the port for redundancy (in below example, the port is Ethernet 3).

    Redundant Port

  7. Click OK.

    Following configuration, Ethernet 1 displays as the Primary role and Ethernet 3 displays as the Secondary role. See below. 

    Ethernet 1 - Primary Role

    Ethernet 3 - Secondary Role

     

Configure Redundancy for ASM

For communication between the SBC 1000/2000 and the ASM to work properly, the ASM port's Default Untagged VLAN must be configured to a VLAN whose logical IP address is in the same subnet as the ASM's IP address. For example, if the ASM port's default VLAN is set to Ethernet 1 VLAN, the logical interface Ethernet 1 IP must have its IP address in the same subnet as the ASM IP.

Configure ASM

Configure Redundancy for ASM with CCE

To configure Ethernet Redundancy with a CCE, follow the above steps to configure an additional pair of Ethernet ports. For example, Ethernet 2 and Ethernet 4. Ensure the Default Untagged VLAN configuraiton for Port ASM 1 matches the configuconfiguration for Ethernet 2.