Skip to end of metadata
Go to start of metadata


In this section:

Overview

These instructions support configuring the SBC SWe Lite Quick Launch; Ribbon recommends this procedure for all users. To deploy the VM manually, refer to Deploying an SBC SWe Lite from the Azure Marketplace.

The SBC SWe Lite is a Microsoft-certified virtualized Session Border Controller (SBC) designed to provide small and mid-sized businesses interworking, security, and survivability for unified communications. The SBC SWe Lite is available for deployment in Azure as a BYOL (Bring Your Own License); it will be created as a virtual machine (VM) hosted in Azure. 

These instructions include how to configure and deploy the SBC SWe Lite in Microsoft Azure teams client on site via SIP trunk. All configuration commands are via Azure Portal.


Figure : SWe Lite in Azure - Network Topology


Step 1: Review Prerequisites

This section details the Microsoft Azure cloud computing requirements for hosting the SBC SWe Lite VM and SBC SWe Lite related resources.

Microsoft Azure Subscription

A Microsoft Azure subscription (with credit) is required. Refer to Microsoft Azure.

Azure Resource created by the "SBC SWe Lite Quick Launch" Requirements


Figure : Azure Requirements for SWe Lite Virtual Machines


ResourceDescription
Resource group

Required by Azure to host the SBC SWe Lite VM and SBC SWe Lite related resource. Resource types are assigned into a resource group.

Virtual network

Interconnects SBC SWe Lite with other equipment, inside and outside Azure.

Virtual subnet

Hosts the SBC SWe Lite IP addresses (SBC SWe Lite support 2 to 5 Network Adapters that require separate subnets).

Azure Virtual Machine RequirementsRefer to Virtual Machine Requirements - Microsoft Azure.
Public IP Address

Dynamic Public IP address associated with a Public FQDN for Management Port.

Static Public IP address for Media Port.

Network InterfaceConnect SBC SWe Lite to a Virtual Subnet.
Network Security GroupACL that protects SBC SWe Lite VM.
Managed DiskContains SBC SWe Lite Operating System.



Step 2: Deploy SBC SWe Lite From Azure Marketplace

When the SBC SWe Lite is deployed via Azure Marketplace, the image automatically appears in the general list of available images in Azure Portal. Deploy the SBC SWe Lite as follows:

  1. Connect to the Azure portal. Refer to portal.azure.com.
  2. From the menu, click Create a Resource.

  3. In the search bar, enter Ribbon and click <Enter>. Select SBC SWe Lite Quick Launch and click Enter.


    Figure : Select SBC SWe Lite


  4. Review the product description and click Create.

    Figure : Product Description


  5. Click the Basics tab.

    Figure : Basics Tab


  6. Select a Subscription.
  7. Select Resource group (click Create new to create a Resource group automatically, or from the drop down box, select a Resource group previously created (i.e, SWeLite 1)
  8. Select a Region.
  9. In Virtual machine name field, enter SBCSWeLite.

  10. Select the Required # of simultaneous calls.
  11. Click Next: Virtual Machine Settings.

    Figure : Virtual Machine Settings Tab


  12. In Virtual machine size, the Virtual Machine size is pre-selected by Ribbon as the recommended size. If you require another size, click Change size to select the applicable VM size. To determine the required VM size, refer to Transcoding Capacity - Microsoft Azure Cloud Deployment in  Calculating Virtual Machine Requirements for an SBC SWe Lite. Supported VM sizes include:

    1. B1ms

    2. B2s

    3. DS1_v2

    4. DS3_v2

  13. Select the storage account for the Virtual Machine's Serial diagnostics.
  14. Click Next: Networking Settings.

    Figure : Networking Settings Tab


  15. In SBC SWe Lite's virtual network, the network is pre-selected by Ribbon. If you require another network, select from the drop down list.
  16. In Management interface subnet, the subnet is pre-selected by Ribbon. If you require another subnet, select from the drop down list.
  17. In Signaling & media interface 1 subnet, the subnet is pre-selected by Ribbon. If you require another subnet, select from the drop down list.
  18. Click Next: SBC SWe Lite Settings.

    Figure : SBC SWe Lite Settings


  19. Click Next: Review + create.
    A screen indicates validation of the VM has passed.

    Figure : Review + create Tab


  20. Review the information.
  21. Click Create.

Step 3: Connect to SBC SWe Lite via Azure Portal

Connect to the SBC SWe Lite via Azure Portal as follows:

  1. Access the Azure portal. Refer to portal.azure.com.
  2. From the menu, click Resource Groups.

  3. Click the Resource Group used above (for example, SweLite1).

    Figure : Select Resource Group

     


  4. Click Settings > Deployment.
  5. Click ribboncommunications.ribbon_sbc_swe-lite_wizard_preview.

    Figure : Select Ribbon Communications Wizard


    Figure : Deployment complete


  6. Click Outputs. Take note of the SWe Lite Management FQDN and public IP recommended for Teams Direct Routing.

    Figure : Select Outputs


  7. Connect to SBC SWe Lite Management FQDN.


For detailed information on reserving a VM resource, refer to Reserving a VM Resource in Azure.

Step 4: License Installation

Trial License Installation

If you are installing an SBC SWe Lite instance in Azure for a trial or demonstration deployment, you can use the 30 day trial license that is included with SBC SWe Lite in Azure by default. If your trial or demonstration deployment lasts for more than 30 days, proceed to Obtaining and Installing a Permanent SWe Lite Trial License. For more information, refer to SBC SWe Lite Trial Offer for Public Cloud Deployment.

Production License Installation

If you are installing an SBC SWe Lite instance to carry live/production enterprise traffic, proceed to Obtaining and Installing an SBC SWe Lite Production License.