Skip to end of metadata
Go to start of metadata

reboot


Purpose

Reboot host operating system

Command Mode

enable

Required Access

level 15

Syntax

reboot system <now | cancel>

Parameters and Operations

Description

now

Reboot the host system immediately.

VX# reboot system now

cancel

Cancel the reboot.

VX# reboot system cancel

register


Purpose

Register with an H.323 gatekeeper.

Command Mode

enable

Required Access

level 15

Syntax

register gatekeeper <0-32767>

Parameters and Operations

Description

0-32767

trunk-group to register, as a value in the allowable range.

VX# register gatekeeper45

reload


Purpose

Reload a script or a routing table currently in the node

Command Mode

enable

Required Access

level 15

Syntax

reload script <all | word>

Parameters and Operations

Description

all

Reload all scripts.

VX# reload all

word

Reload a specified script name.

VX# reload nameofscript

reload


Purpose

Reload audio files for music on demand.

Command Mode

enable

Required Access

level 15

Syntax

reload moh-files

Parameters and Operations

Description

moh-files

Reload music on demand files.

VX# reload moh-files

reset


Purpose

Reset ACL, channel, connections, failed calls, links, ports, statistics, CLI session, or WAN connections.

Command Mode

global

Required Access

level 15

Syntax

reset <acl | channel | connection | failed-calls | link | port | statistics | cli | wan>

Parameters and Operations

Description

acl

Resets ACL counter

channel

Reset a specified channel, or all channels to idle state. Any calls currently in progress are discarded gracefully. A confirmation prompt is presented.

VX# reset channel all

VX# reset channel1:1:2:3

connection

Reset the VXbuilder subsystem (SBCP).
Issuing this command from the CLI kills currently active operations at the VXbuilder application.

VX# reset connection sbcp

failed-calls

Reset failed call counter (boost) from LQM from a specified node ID.

VX# reset failed-calls 1:2:2:3

link

Reset all SS7 links, or a specified SS7 link.

VX# reset link2

VX# reset link all

port

Reset a specified port. Use standard equipment notation in your command entry to specify a port.

VX# reset port 1:1:2

statistics
call-throttle
port
channel

Reset call-throttling statistics related to call-throttling, channels, or ports. When specifying ports or channels, use standard equipment notation to identify the port or channel in your command string.

VX# reset stat call-throttle

VX# reset stat call

VX# reset stat port 1:1:2

VX# reset stat port all

VX# reset stat channel1:1:2:3

cli

Reset a specified CLI session. You must identify the CLI session number to be reset, in your command entry.

VX# reset climyuseraccount

wan

Reset WAN dialup connection, serial link, or history log.

VX# reset wan dial-up

VX# reset wan serial link

VX# reset wan history log
Type 'yes' to reset the WAN history log, or anything else to abort: yes
WAN History log reset.

restart


Purpose

Restart alarm log, a VX node, or SPM.

Command Mode


Required Access

level 15

Syntax

restart <log | VX | spm>

log
alarm
trace

Restart the alarm log.

VX# restart log alarm
New alarm started.

VX# restart log trace
New tracing log started.

VX

Restart the VX node. The system will query for confirmation to do the restart.


VX# restart VX
Copy running-config to startup-config [yes/no]: n
Are you sure you want to restart without saving [yes/no]: n
VX#

spm
enable
disable

Enable or disable SPM restart.

VX# restart spm enable
SPM restart allowed.

ringdown-destination


Purpose

Configure the dialed number for CAS Tunnel and MRD calls

Command Mode

/config/chan-profile

Required Access

level 15

Syntax

ringdown-destination <number >

Parameters and Operations

Description

number

0 to 63 digits

VX# ringdown-destination 67543