Skip to end of metadata
Go to start of metadata

set

Purpose

Establish system configuration

Command Mode


Required Access

level 15

Syntax

set <time | stu | fndbt>

Parameters and Operations

Description

time

Control system time.

stu15

Modify STU settings.

fnbdt

Modify FNBDT settings.

time

Purpose

Set month, day, year, and hour, minutes, seconds on the VX node.

Command Mode


Required Access

level 15

Syntax

time <word>

Parameters and Operations

Description

word

Calendar date or time, using the following format:
Calendar date entry: MM/DD/YYYY

VX# set time11/18/2004
Time entry: HH:MM:SS

VX# set time12:15:05

stu

Purpose

Set STU operational mode, and enable or disable V.35 relay options.

Command Mode


Required Access

level 15

Syntax

stu <mode | relay | norelay>

Parameters and Operations

Description

mode
auto
stu
fnbdt

Set operational mode for the STU, as either auto, stu, or fnbdt

  • auto: operate in FNBDT/STU auto detect mode.
    VX# set stu mode auto
  • stu: operate in STU-III/STU-IIb mode.
    VX# set stu mode stu
  • fnbdt: operate in FNBDT mode (v.32 bis) 14400
    VX# set stu mode fnbdt

relay

Use relay V.32 for STU-III.

VX# set stu relay

norelay

Do not use relay V.32 for STU-III (parallel).

VX# set stu norelay

fnbdt

Purpose

Set FNBDT (future narrow-band digital terminal) parameters.

Command Mode


Required Access

level 15

Syntax

fnbdt <rate | synccontrol>

Parameters and Operations

Description

rate
4800-14400

Change FNBDT rate to use a bpps value in the range 4800-14400.
4800, 7200, 9600, 12000, 14400
VX#set fnbdt 12000

synccontrol
enable
disable

Enable or disable sync/async control.

VX# set fnbdt synccontrol enable

show

Purpose

Display information about VX's state and system

Command Mode


Required Access

level 0 (except where noted)

Syntax

show <option> <modifier>


VX CLI Show Commands

Parameters and operations

Description

Parameters and operations

Description

show ad

View the active directory join status

show running-config

View the currently running configuration information

show alarms

View alarm configuration and history

show port

View port information

show arp

Send the ARP cache to the trace log.

show processor

View system processor information

show acl

View ACL information

show reroute

View reroute tables

show sniffing

View sniffing status

show route-table1

View the routing table

show backup-config

View backup configuration

show startup-config

View the startup configuration

show boot-config

View boot configuration

show scripts

View AA scripts

show card

View specified card information

show services

View status of internal services

show call

View call information

show shelf65570

View VX shelf configuration

show channel

View information about one or more channels

show VXgate

View VXgate connection status

show clocking

View system clock information

show ftp-users73627

View FTP user list

show chan-profile

View information about a channel profile

show VXwatch

View VXwatch connection status

show certificate

View current certificate information

show snmp

View SNMP settings

show sip-subscribes32780

View SIP subscriber devices

show dhcp

View DHCP server information

show ewf

View enhanced write filter, protects FLASH from excessive writes

show diffserv

View DiffServ mapping table

show snpp

View SNPP client settings

show directory

View contents of VX public directory

show sp

View SS7 signalling point

show disk-layout

View the functions mapped to each drive

show syslog

View syslog information

show dns

View all DNS servers

show startup-config

View the VX startup configuration

show ethernet-interfaces

View Ethernet interfaces

show statistics

View VX system statistics

show firmware

View the current firmware version

show system

View VX system global parameters

show ewf

View EWF information

show r-2 table

View R2-table information

show free-space

View free space currently available on VX devices

show registrar-table

View names of all registered SIP users

show functions

View script functions loaded on the node

show terminal

View current terminal settings

show groups

View the groups mapping table

show time

View the current time at the VX node

show interface

View interface information

show trace

View system trace information

show ike

View IKE settings

show moh-cache

View music on demand file information

show ip

Output IP configuration from SPM to trace log

show tone-table

View tone-table information

show ipsec6

View IPSec settings

show translate

View translation table information

show licenses

View system license settings

show trunk-group

View trunk-group information

show linkset

View SS7 linkset

show users

View user account information

show link7

View specified SS7 link

show version

View VX version information

show lqm

View LQM statistics

show v150umr-profile arg

View V.150.1 profile information.

show media-class5

View media class information

show wan

View WAN adapter information

show msg-xlat

View message translation table

show who

View user account names currently logged into the system

show node-id

View VX node ID



Where multiple items are requested, they are displayed in summary form unless the full argument is specified.

VX CLI Show Commands Syntax Examples

show ad

VX# show ad

Node is not joined to a domain.
show alarms

VX# show alarms

Alarm log to disk          disabled

Current alarm types enabled:

sys cli tel sig vox cas isdn cfg proc bcmp bdap bmp bsp ibp vtp snmp nms isal is

up rtp ip h323 sip ivr


Alarm history buffer:

Alarm history done.
show arp

VX# show arp

ARP cache, 2 entries:

Pos:  IP address:      MAC address:       Interface:  State:     Use timeout:  Refresh timeout:

====  ===============  =================  ==========  =========  ============  ================

0  134.56.72.14     00:e0:18:98:3c:76  ip0         Active      515 sec      1195 sec

1  134.56.72.5      00:00:1d:92:e5:9e  ip0         Active      571 sec      1171 sec
show acl

VX# show acl

No rules in configuration.  Will still query SPM for it's tables.


Acl rule information sent to ssys debug system.
show sniffing

VX# show sniffing

Network sniffing is disabled
show backup-config

VX# show backup-config

Invalid command.
show boot-config
show card

VX# show card all

Slot             Enabled  State        In service  Type

===============  =======  ===========  ==========  ====================

1:3              false    not present  true        None

1:15             true     active       true        Virtual
show call

VX# show call <1-ANY> | summary | details

C

all# Local Remote Remote Calling Number Called Number Iface Remote Node ID Iface Remote Node ID CSN ICSN OCSN In or Trunkgroup# Out or Trunkgroup#

---  ----  ----  ----  ---------  ---------  ---  -----------



show certificate

VX# show certificate storelocation1

Issued To            Issued By            Expiration     Friendly Name

-------------- ------------ -------- --------------------

show channel

VX# show channel <shelf#>:<card#>:<port#>:<channel#> | all

Channel Type State D Call direction Peer channel

===============  =======  ====================  =  ==============  ============
show clocking

Primary Clock Source : Slot: 1 Port: 1

Secondary Clock Source : None

show chan-profile

VX# show chan-profile

Command token                        Lv. Help

---------                        -- ---

<1-...>                                0 Channel profile


VX# show chan-profile 1

Description

Type                            CAS E&M

DTMF/MF Digit level             0

Start type                      Wink Start

Digit type                      DTMF

Service tones                   Yes

On hook Rx bits                 A=0 B=0 C=0 D=0

Off hook Rx bits                A=1 B=1 C=0 D=0

On hook Tx bits                 A=0 B=0 C=0 D=0

Off hook Tx bits                A=1 B=1 C=0 D=0

Inband info location            In Progress Message

Interdigit timeout              250

Generated wink time             250

Expected wink time              500

Time to wait for wink           10000

Immediate start delay           500

Time to listen for first digit  0

Idle reset delay                500

Digit on time                   100

Digit off time                  75


VX#



testVX# show chan-profile 10

Description                     SIP - Normal network

Type                            SIP

Interdigit timeout                                            500 ms

Timer T1 - RTT Estimate                               500 ms

Timer T2 - Maximum retransmit interval for non-INVITE req/INVITE resp                           4000 ms

Timer T4 - Maximum duration a message will remain in the network.                5000 ms

Timer  D - Wait time for response retransmits                       32000 ms
show dhcp

VX# show dhcp

Ethernet adapter internal DHCP range: 10.10.0.1 - 10.10.63.254

Loopback adapter IP address: 10.10.255.253


show diffserv

VX# show diffserv

DiffServ mapping table

----------------

DiffServ row #1: Map 00000000 / Mask 11100000 -> Priority 0

DiffServ row #2: Map 00101000 / Mask 11100000 -> Priority 1

DiffServ row #3: Map 00110000 / Mask 11100000 -> Priority 1

DiffServ row #4: Map 00111000 / Mask 11100000 -> Priority 1

DiffServ row #5: Map 01001000 / Mask 11100000 -> Priority 2

DiffServ row #6: Map 01010000 / Mask 11100000 -> Priority 2

DiffServ row #7: Map 01011000 / Mask 11100000 -> Priority 2

DiffServ row #8: Map 01101000 / Mask 11100000 -> Priority 3

DiffServ row #9: Map 01110000 / Mask 11100000 -> Priority 3

DiffServ row #10: Map 01111000 / Mask 11100000 -> Priority 3

DiffServ row #11: Map 10001000 / Mask 11100000 -> Priority 4

DiffServ row #12: Map 10010000 / Mask 11100000 -> Priority 4

DiffServ row #13: Map 10011000 / Mask 11100000 -> Priority 4

DiffServ row #14: Map 10111000 / Mask 11100000 -> Priority 5


DiffServ mapping table sent from SPM to aud debug system.


VX#
show directory

To view all directories currently loaded at the VX system, use the show directory command at the VX command prompt.

VX# show directory

[2004-11-04  03:37:15\
 Alarm
[2004-11-04  04:03:27\             Config

[2004-08-29  18:59:26\             Crash

[2004-11-04  03:47:29\             Debug

[2004-08-29  18:59:37\             IVR

[2004-11-04  03:47:35\             QUARANTINE

[2004-08-29  18:27:23\             sniff

[2004-11-04  03:59:51\             Upgrade

8 files total, 0 bytes used.


To view a specific directory, use the show directory command with a directory name, as demonstrated in the following sections:

show alarm

VX# show directory alarm

[2004-11-04  03:37:15\             147  2004-11-04T03-36-04.LOG

[2004-11-05  05:43:25\             106  2004-11-04T04-03-28.LOG

[2004-11-24  04:09:01\             427  2004-11-05T06-15-52.LOG

[2004-11-24  04:10:38\              97  2004-11-24T04-10-06.LOG

[2004-12-06  18:03:04\              97  2004-12-06T18-02-28.LOG

5 files total, 874 bytes used.
show config

VX# show directory config

[2004-11-04  04:03:27\           20448  BACKUP.CFG

[2004-12-06  18:02:10\           20452  VXIP.CFG

2 files total, 40900 bytes used.
show crash

VX# show directory crash

[2004-11-05  07:10:28\         1509461  minidump*2004-11-05*07.10.26.dmp

[2004-11-17  19:00:14\         1527509  minidump*2004-11-17*19.00.12.dmp

[2004-11-24  04:09:04\          331574  minidump*2004-11-23*20-09-03-773*048C.dmp

3 files total, 3368544 bytes used.


show debug

VX# show directory debug

[2004-11-04  03:51:29\          108385  2004-11-04T03-46-10.LOG

[2004-11-04  03:47:32\           20991  2004-11-04T03-47-29-SPM.LOG

[2004-11-04  03:54:49\           20882  2004-11-04T03-53-05-SPM.LOG

[2004-11-04  03:56:02\           62993  2004-11-04T03-54-40.LOG

[2004-11-04  04:03:38\           26570  2004-11-04T04-01-47-SPM.LOG

[2004-11-05  06:14:36\        25382514  2004-11-04T04-03-27.LOG

[2004-11-04  04:04:07\           21881  2004-11-04T04-04-05-SPM.LOG

[2004-11-24  04:09:01\       439933459  2004-11-05T06-14-36.LOG

[2004-12-06  18:02:21\       292074514  2004-11-24T04-10-06.LOG

[2004-11-24  04:10:38\           21399  2004-11-24T04-10-36-SPM.LOG

[2004-12-06  18:02:28\        71367171  2004-12-06T18-02-28.LOG

[2004-12-06  18:03:04\           21426  2004-12-06T18-03-02-SPM.LOG

[2004-11-04  03:51:08\            1052  DIOP2004-11-04T03-51-08.LOG

[2004-11-04  03:59:51\             102  DIOP2004-11-04T03-59-50.LOG

[2004-11-05  06:19:56\         1057421  snapshot*2004-11-05*06.19.56.txt

[2004-11-04  03:47:35\             352  SSM.LOG

[2004-11-04  03:51:10\            2851  SYSUPG*00-2004-11-04T03-51-08.LOG

[2004-11-04  03:59:52\            8647  SYSUPG*01-2004-11-04T03-54-37.LOG

18 files total, 830132610 bytes used.
show IVR

VX# show directory ivr

0 files total, 0 bytes used.
show quarantine

VX# show directory quarantine

0 files total, 0 bytes used.
show sniff

VX# show directory sniff

0 files total, 0 bytes used.
show upgrade

VX# show directory upgrade

[2004-12-06  18:01:46\           17279  0409.old

[2004-12-06  18:01:46\            2769  loopback.old

[2004-12-06  18:01:46\         6434816  VXIP.old

[2004-12-06  18:01:42\         6789120  VXPKG.TAR

[2004-12-06  18:01:46\          246784  spm.old

[2004-12-06  18:01:46\            1516  spm*m.old

[2004-12-06  18:01:46\           73728  SSM.old

7 files total, 13566012 bytes used.
show disk-layout

VX# show disk-layout

C:\ - Primary Drive        : Firmware, Drivers, VX app, VX data, Configuration, Alarm catalogs, Driver updates, OS Files

D:\ - Data Storage Drive : CDR Storage, Trace logs, Upgrade files, Debug dumps, IVR, Alarm logs, Certificates, Trace snapshots, Sniff Logs, Quarantine files

E:\ - Persistent Data Drive: Configuration

R:\ - Temporary Data Drive : Registrar data, Temporary data


Unavailable functions:

Null Device          : Not currently in use by VX
show dns

VX# show dns

No DNS servers configured.
show ethernet-interfaces

VX# show ethernet

eth0:

MAC address: [02:00:4C:4F:4F:50\

Description: VXip Loopback Adapter

Media: connected


eth1:

MAC address: [00:80:50:03:A5:67\

Description: Intel 8255x-based PCI Ethernet Adapter (10/100)

Media: connected


eth2:

MAC address: [00:80:50:03:A5:68\

Description: Intel 8255x-based PCI Ethernet Adapter (10/100)

Media: connected
show ewf

NewNode# show ewf

Protected Volume Configuration

Type            RAM

State           ENABLED

Boot Command    COMMIT

Param1        0

Param2        0

Persistent Data ""

Volume ID       DD E4 BE CE 00 7E 00 00 00 00 00 00 00 00 00 00

Device Name     "\Device\HarddiskVolume1" [C:\

Max Levels      1

Clump Size      512

Current Level   1


Memory used for data 3062784 bytes

Memory used for mapping 4096 bytes
show firmware

VX# show firmware

Please wait, calculating checksums....

VXIP file size: 6377472 bytes

VXIP creation time: 20040518 23:34:15.638

VXIP firmware checksum: 3B25129E
show free-space

VX# show free-space

Primary Drive        : Firmware, Drivers, VX app, VX data, Configuration, Alarm catalogs, Driver updates, OS Files

Total bytes available to VXIP        272888 Kbytes

Free bytes available to VXIP         272888 Kbytes

Total bytes on device                   480280 Kbytes


Data Storage Drive : CDR Storage, Trace logs, Upgrade files, Debug dumps, IVR, Alarm logs, Certificates, Trace snapshots, Sniff Logs, Quarantine files

Total bytes available to VXIP      29531072 Kbytes

Free bytes available to VXIP       29531072 Kbytes

Total bytes on device                 39062012 Kbytes


Persistent Data Drive: Configuration

Total bytes available to VXIP         18165 Kbytes

Free bytes available to VXIP          18165 Kbytes

Total bytes on device                    20663 Kbytes


Temporary Data Drive : Registrar data, Temporary data

Total bytes available to VXIP         24507 Kbytes

Free bytes available to VXIP          24507 Kbytes

Total bytes on device                    24511 Kbytes


show ftp-users

VX# show ftp-users

FTP users under VX group:

Administrator

ftpuser

linda


show functions

View the currently loaded script functions at the VX node.

VX# show function

Loaded functions:

Call::Connect (0)

Call::GetDigits (0)

Call::PlayFile (0)

Call::RecordFile (0)

Call::Alert (0)

Call::DisconnectPeer (0)

Call::PrepareDigitRecall (0)

Call::PlayStream (0)

Call::Progress (0)

Call::SendDigits (0)

DB::ValidateAccountID (0)

DB::TranslateCallingNumber (0)

DB::GetAccountBalance (0)

DB::GetAccountLimit (0)

DB::GetLanguage (0)

DB::GetRate (0)

DB::GetFirstBillingInterval (0)

DB::GetNextBillingInterval (0)

DB::GetAccountPIN (0)

DB::SetAccountPIN (0)

DB::AddAccountBalance (0)

DB::SetLanguage (0)

DB::GetFlags (0)

DB::UpdateFlags (0)

DB::User0 (0)

DB::User1 (0)

DB::User2 (0)

DB::User3 (0)

DB::User4 (0)

DB::User5 (0)

DB::User6 (0)

DB::User7 (0)

DB::User8 (0)

DB::User9 (0)

DB::SetBDAPTimeOut (0)

ODBC::OpenConnection (0)

ODBC::ExecuteQuery (0)

ODBC::OpenRecordset (0)

ODBC::GetColumn (0)

ODBC::IsNull (0)

ODBC::IsEOF (0)

ODBC::MoveNext (0)

ODBC::CloseRecordset (0)

ODBC::CloseConnection (0)

ODBC::SetQueryTimeout (0)

ODBC::BeginTransaction (0)

ODBC::CommitTransaction (0)

ODBC::RollbackTransaction (0)

ODBC::GetTime (0)

ODBC::RetrieveCol (0)

Misc::SendMail (0)

Misc::GetNodeTime (0)

Misc::FormatTime (0)

Misc::ConvertNodeIDToString (0)

Misc::ConvertStringToNodeID (0)

Misc::RaiseAlarm (0)

Misc::Replace (0)

Misc::GetField (0)

Misc::TrimString (0)

Misc::EnterCriticalSection (0)

Misc::LeaveCriticalSection (0)

TCP::Connect (0)

TCP::Send (0)

TCP::Receive (0)

TCP::Close (0)

TCP::CloseAllSockets (0)

TCP::AutoCleanup (0)

global::CreateData (0)

global::Exists (0)

global::Set (0)

global::Get (0)

global::DeleteData (0)

global::SetOption (0)

global::GetDataNameAt (0)
show groups

VX# show groups

Access level   Group Name

============   ====================

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

Audit
show ike

VX# show ike peers

---------- ----------------

Peer Ip Address   Key Value

------------  ----------------

172.25.16.247      jay

172.25.16.248      arun

172.25.16.249      vineet


---- ------------------------------

Counter Peer Ip Address with Certificate

---- ------------------------------

1      172.25.16.250

2      172.25.16.251

3      172.25.16.252


show ike sa-list

show ike config


Addition show ike commands include:

show ike config
show ike sa-list
show interface

VX# show interface ip0

Current configuration:

Interface enabled   enabled

IP Address          134.56.72.145

Mask                255.255.255.0

BMP Enabled         yes

VTP Enabled         yes

SIP Enabled         yes

H.323 Enabled       no

SBCP Enabled        yes

SNMP Enabled        no

FTP Enabled         yes

TELNET Enabled      yes

SSH Enabled         yes

Frame density       Fill to MTU

Frame density       0

Ethernet adapter    1


Current interface status:

Media status        connected


VX# show interface ip all

Interface           ip0

Interface enabled   enabled

IP Address          134.56.72.145

Mask                255.255.255.0

BMP Enabled         yes

VTP Enabled         yes

SIP Enabled         yes

H.323 Enabled       no

SBCP Enabled        yes

SNMP Enabled        no

FTP Enabled         yes

TELNET Enabled      yes

Frame density       Fill to MTU

Frame density       0

Ethernet adapter    1

Media status        connected
show ip

VX# show ip

Active network configuration:


=============================


Ethernet adapter (1) [00:00:60:db:11:ff\ (rx=0 kB/s, tx=0 kB/s)

Name  IP address      Mask             Protocols

ip0   172.25.16.247   255.255.255.192  BMP VTP SNMP SBCP H323 SIP FTP TELNET SSH

 


VLAN tagging: Disabled


Voice VLAN-ID           : 0x1(1), Priority: 0

Signaling VLAN-ID       : 0x1(1), Priority: 0

Data VLAN-ID            : 0x1(1), Priority: 0

Number of packets dropped due to mismatched VLAN tag:0


Ethernet adapter (2) [00:00:60:db:12:00\ (rx=0 kB/s, tx=0 kB/s)

Name  IP address      Mask             Protocols

ip1   20.20.20.47     255.255.255.0    BMP VTP SBCP H323 SIP FTP TELNET SSH


VLAN tagging: Enabled


Voice VLAN-ID           : 0x12c(300), Priority: 1

Signaling VLAN-ID       : 0xc8(200), Priority: 4

Data VLAN-ID            : 0x64(100), Priority: 5

Number of packets dropped due to mismatched VLAN tag:83


Dial-Up adapter (3)

Name  IP address            Link (bps) Rx (bps)   Tx (bps)

ppp1  -                       (down)   0          0

Enabled protocols: BMP VTP SBCP H323 SIP FTP TELNET SSH


IP routes:

Dest/Router IP   Mask/Router MAC  Iface  Src/Metric

0.0.0.0          0.0.0.0          ip0    172.25.16.247

172.25.16.193    00:11:bc:fb:57:bc       1
show ipsec

VX# show ipsec policy

IPSec Policy

====================================================================

Ipsec Policy 1

Direction: OUT

Action: Secure (Enabled)

Protocol: 0

Source Ip Address: 3.3.3.3, Source Mask: 255.255.255.255

Source Port Range:0-0

Destination Ip Address: 1.1.1.1, Destination Mask: 255.255.255.255

Destination Port Range:0-0

ESP Configuration

Integrity Algorithm : SHA1

Encryption Algorithm : DES

Mode : Tunnel (Source Ip 6.6.6.6, Destination Ip 7.7.7.7)

--------------------------------------------------------------------

Ipsec Policy 2

Direction: IN

Action: PassThrough (Enabled)

Protocol: 0

Source Ip Address: 1.1.1.1, Source Mask: 255.255.255.255

Source Port Range:0-0

Destination Ip Address: 2.2.2.2, Destination Mask: 255.255.255.255

Destination Port Range:0-0


Ipsec Policy 2

Direction: OUT

Action: PassThrough (Enabled)

Protocol: 0

Source Ip Address: 15.15.15.15, Source Mask: 255.255.255.255

Source Port Range:0-0

Destination Ip Address: 16.16.16.16, Destination Mask: 255.255.255.255

Destination Port Range:0-0


Additional show ipsec commands include:

show ipsec sa-list

The show ipsec sa-list command is not permitted during a Telnet session. It is permitted by way an SSH session only.

show ipsec policy index <n> direction <IN | OUT>

Note that the index appears before the direction argument.

show licenses

VX# show lic

Item                         Total      Available

===========================  =========  =========

1-port telephony cards       unlimited

2-port telephony cards       unlimited

4-port telephony cards       unlimited

16-port telephony cards      unlimited

8-port telephony cards       unlimited

Dual T3 cards                unlimited

SS7 interface cards          unlimited

ISDN channels                unlimited

E&M CAS channels             unlimited

R2 CAS channels              unlimited

H.323 channels               unlimited

SIP channels                 unlimited

IVR sessions                 unlimited

STU sessions                 unlimited

Harris 20/20                 unlimited

T38 Fax                      unlimited


show linkset

VX# show linkset all

SP#  Linkset  Enabled  Adj Pt. Cod  Valid  Active  # Activ  Congested  # Cngstd

===  =======  =======  ===========  =====  ======  =======  =========  ========

2       1      no       1.2.3       false   n/a     n/a       n/a       n/a

VX# show link all

No.  Enabled  LinkSet  Priority  SLC  PCR  Sync Status  L2 status  L3 status Block  Inhibit Congestion  EMergency

===  =======  =======  ========  ===  ===  ===========  ========== ===============  ==================  ==========
show lqm

VX# show lqm

Command token                        Lv. Help

---------                        -- ---

ip                                    0 Choose the IP interface number

ppp                                   0 Choose the PPP interface number

raw                                   0 Choose the RAW interface number

ser                                    0 Choose the IP-over-serial interface number


VX# show lqm ip

Command token                        Lv. Help

---------                        -- ---

<0-61>                                 0 Interface number


VX# show lqm ip 0

Node ID          IP address       State  Avg RTT   Min RTT   Max RTT   Loss %

===============  ===============  =====  ========  ========  ========  ========

0:0:0:5 134.56.72.14 DOWN 0 ms 0 ms 0 ms 99 %

VX# show lqm ppp 0

Interface ppp0 has no peers.

VX# show lqm raw

Command token                        Lv. Help

---------                        -- ---

<0-61>                                 0 Interface number


VX# show lqm raw 0

Interface raw0 has no peers.
show media-class
VX# show media-class

Command token                        Lv. Help

---------                        -- ---

<1-...>                                0 Media class


VX# show media-class 1

Table 1 -- G.711 mu-law

Codec       Silence  Tx Size  Rx Size  Rate    FEC

------  ----  -----  -----  -----  ---

PCMU        yes      0        0        0       no
show msg-xlat

VX# show msg-xlat

Command token                        Lv. Help

---------                        -- ---

<1-32767>                              0 Message table number


VX# show msg-xlat 1

No message translation table 1.


VX# show msg-xlat 3

No message translation table 3.
show moh-cache

VX# show moh-cache

Audio file      Cache size(bytes)  MarkedForDeletion  UsageCount

-------     ------------ ------------ --------

1.g711*u        4267               True               1

1.g711*u        4267               False              0

Greeting.g711*u 19594              False              0
show node-id

VX# show node-id

Command token                        Lv. Help

---------                        -- ---



VX# show node-id

System node id: 0:0:0:10
show port

VX# show port

Command token                        Lv. Help

---------                        -- ---

::               0 Port specifier

all                                    0 All ports


VX# show port all

Port        Type     Enabled  Channels  In service

==========  =======  =======  ========  ====================

1:3:1                                               not activated

1:3:2                                               not activated

1:15:1      H.323    true     0         true

1:15:2                                              not activated
show processor

VX# show processor

Command token                        Lv. Help

---------                        -- ---

cpu                                    0 Show CPU usage statistics



VX# show processor

Processor architecture: Intel Pentium III, Model 8, Stepping 6

Number of processors:   1

Processor speed:        800 MHz


VX# show processor cpu

Average CPU usage: 5 sec: 0.20%; 1 min: 0.02%; 5 min: 0.01%

Call Throttle:      CPU1:  0.00%

Accept/Reject:  5 sec:        0/      0(  0.00%),   0.00 calls/sec

1 min:        0/      0(  0.00%),   0.00 calls/sec

5 min:        0/      0(  0.00%),   0.00 calls/sec

Total:        0/      0(  0.00%)

TID    CPU  Name                  5 sec    1 min    5 min   Memory

=====  ===  ====================  =======  =======  ======= ========

1    0  cmon                    0.00%    0.00%    0.00%        0

2    1  harness                 0.00%    0.00%    0.00%        0

3    0  debug                   0.00%    0.00%    0.00%        0

4    0  driver                  0.00%    0.00%    0.00%        0

5    0  messenger               0.00%    0.00%    0.00%        0

6    0  sercon                  0.00%    0.00%    0.00%        0

7    0  license                 0.00%    0.00%    0.00%        0

8    0  timer                   0.00%    0.00%    0.00%        0

9    0  telelib                 0.00%    0.00%    0.00%        0

10    0  spm*rx                  0.00%    0.00%    0.00%        0

11    0  spm                     0.00%    0.00%    0.00%        0

12    0  transport*wrk           0.00%    0.00%    0.00%        0

13    0  vtpxmit                 0.00%    0.00%    0.00%        0

14    0  vtprcv                  0.00%    0.00%    0.00%        0

15    0  vtpqm                   0.00%    0.00%    0.00%        0

16    0  LoopBack Interface      0.00%    0.00%    0.00%        0

18    0  wan                     0.00%    0.00%    0.00%        0

19    0  dns                     0.00%    0.00%    0.00%        0

20    1  snmp                    0.00%    0.00%    0.00%        0

21    0  ibp                     0.00%    0.00%    0.00%        0

22    0  lqm                     0.00%    0.00%    0.00%        0

23    0  timeserver              0.00%    0.00%    0.00%        0

24    1  cgc                     0.00%    0.00%    0.00%        0

25    0  cdr                     0.00%    0.00%    0.00%        0

26    0  callrtr                 0.00%    0.00%    0.00%        0

27    0  dspservice              0.00%    0.00%    0.00%        0

28    0  snpp                    0.00%    0.00%    0.00%        0

29    0  audiortr                0.00%    0.00%    0.00%        0

30    0  telrecv                 0.00%    0.00%    0.00%        0

31    0  pktproc                 0.00%    0.00%    0.00%        0

32    0  telxmit                 0.00%    0.00%    0.00%        0

33    0  telisdn                 0.00%    0.00%    0.00%        0

34    0  televent                0.00%    0.00%    0.00%        0

35    1  bmp                     0.00%    0.00%    0.00%        0

36    0  sip                     0.00%    0.00%    0.00%        0

37    0  h323                    0.00%    0.00%    0.00%        0

38    0  ss7                     0.00%    0.00%    0.00%        0

39    0  t3                      0.00%    0.00%    0.00%        0

48    0  cli                   100.00%  100.00%  100.00%        0
show reroute

VX# show reroute

Command token                        Lv. Help

---------                        -- ---

<1-...>                                0 Show contents of reroute table




VX# show reroute 1

Code     Definition

====     ==========

3        no route


VX# show reroute

ID    Description

==    ===========

1    Added by Upgrade
show route-table

VX# show route-table

Command token                        Lv. Help

---------                        -- ---

telephony                              0 Telephony routing table

h323-route                             0 H.323 routing table

ibp-route                              0 IBP routing table

ip-route                               0 IP routing table

peer-route                             0 Peer inbound routing table

sip-route                              0 SIP routing table

ss7-route                              0 SS7 routing table
show route-table telephony

VX# show route-table telephony

Command token                        Lv. Help

---------                        -- ---

<0-...>                                0 Routing table number


VX# show route-table telephony 3

Current configuration:

Table 3:

Description         SIP-from 235

Entry 1:

Description

Enabled                   yes

Input                     +@172.25.16.247

Match Exact Length        yes

Output                    \1@20.20.20.48

Supp. digits

Trunk group               4

Destination/SipProxy

Match number type         any

Match number plan         any

Match carrier selection   any

Match carrier code

Output number type        unknown

Output number plan        unknown

Output carrier selection  any

Output carrier code

Output circuit code       any

Message Translation       0

Media class               0

Transfer Capability       any

Ping Limit                0

Media DiffServ            01010000

Signaling DiffServ        01010000

Priority                  0

Jitter Minimum            100

Jitter Optimization       7

SIPRegistrarTable         no



===================================




show route-table h323-route

VX# show route-table h323-route

No H323 routing table.
show route-table ibp-route

VX> show route-table ibp-route

No.  Destination      Mask             Intf.  Priority  Enabled

--  ---------         --------         ---    ----        -----

1    0:0:0:0          0:0:0:0          ip0    0           Yes
show route-table ip-route

VX# show route-table ip-route

No.  Destination      Mask             Gateway          Source Address   Intf.  Priority

--  ---------         --------          ---------       ---------        ---    ---

1    0.0.0.0          0.0.0.0          134.56.72.5      0.0.0.0          ip0    0


show route-table peer-route

VX# show route-table peer

No peer inbound routing table.
show route-table sip-route

VX# show route-table sip

No SIP routing table.
show running-config

VX# show running-config

Please wait...

VXIP FILEVERSION:2.00 TYPE: DBDUMP

ConfigVersion 7304

ModTime 1583572327

Info

.......a length configuration dump is provided......

User.1.Name VX
show scripts

VX# show scripts

Configured scripts:

plar

stu

tcpsample2


Loaded scripts:

Call

DB

ODBC

Misc

TCP

global


show services

VX# show services

Short Name  Service                      State         Failure Reason

==========  ===========================  ============  ==============

cmon        CPU monitor                  started

config      Configuration manager        started

tmail       Thread mail service          started

debug       Debugging service            started

alarm       Alarm service                started

license     License manager              started

driver      Driver manager               started

timer       Timer service                started

telelib     Telephony base libraries     started

messenger   Messenger service            started

winsock     Winsock manager              started

h110        H.110 Bus Manager            started

pci         PCI Manager                  started

sercon      Serial Console Manager       started

snpp        SNPP service                 started

spm         SPM controller               started

interfaces  Interface controller         started

wan         WAN interface manager        started

dns         DNS service                  started

snmp        SNMP service                 started

ibp         Inter-B protocol stack       started

lqm         Link Quality Manager         started

timeserver  Time Synchronization         started

cgc         Call Garbage Collector       started

callrtr     Call routing service         started

scripts     Script manager               started

tele        Telephony service            started

telrecv     Telephony receiver           started

pktproc     Telephony packet processor   started

telxmit     Telephony transmitter        started

telisdn     Telephony ISDN control       started

televent    Telephony Event Manager      started

dspservice  DSP Request Servicer         started

t3          T3 board manager             started

ss7         SS7/Analog hardware manager  started

bmp         B Monitoring Protocol        started

rtp         RTP service                  started

sip         SIP Manager                  started

h323        H.323 service                started
show shelf

VX# show shelf

Shelf 1

Current configuration:

Clock master card            3

Clock master port            1

Clock second card            3

Clock second port            1

Jitter buffer minimum delay  50

Jitter buffer optimization   7
show VXgate

VX# show VXgate

Current configuration:

CDR logging enabled          no

Node ID          Priority

-----------  ------

No VXgates in configuration.

Current time is 20041105 06:01:46.

Configured VXgates:

NodeID           Link  Pri  Loss  Ping      Status

===============  ====  ===  ====  ========  ================================

No VXgate currently available.

There are currently 0 CDRs in local storage.

There are currently 0 CDR pages mapped into memory.
show VXwatch

VX# show VXwatch

Client  Interface  Peer name

Number  Name

----  -----  -------------


Number of clients: 0
show sip-subscribes

VX# show sip-subscribes

User               Proxy Contact                         Expires

=================  ===================================   ======

No SIP devices have subscribed at this time.


show snmp

VX# show snmp

System contact      Kevin

System location

Read community      public

MIB-II support      no
show snpp

VX# show snmp

System contact      Kevin

System location

Read community      public

MIB-II support      no

VX# show snpp

SNPP service: disabled.

SNPP server not configured.

SNPP userID not configured.

SNPP minimum page level: 0
show sp

VX# show sp

Command token                        Lv. Help

---------                             -- ---

                                      0  Signalling point specifier

all                                   0  All signalling points


VX# show sp all

SP#  Enabled  State           Point Code       CLLI          Switch Type   Valid

===  =======  ==============  ===============  ============  ============  =====
show startup-config

VX# show startup-config

Please wait...

VXIP FILEVERSION:2.00 TYPE: DBDUMP

ConfigVersion 7304

ModTime 1583572327

Info

.......a length configuration dump is provided......

User.1.Name VX
show statistics

VX# show statistics

Command token                        Lv. Help

---------                        -- ---

port                                   0 Show statistics for a port

channel                                0 Show statistics for a channel


VX# show statistics port

Command token                          Lv. Help

---------                              -- ---

::                                     0 Port specifier

all                                    0 All ports


VX# show statistics port all

Port     Current Current Total   Total   Total   Total   Connect IVR

Calls   IVR     Calls   Connect Refuse  Error   Time    Time

=======  ======= ======  ======  ======= ======  ======  ======  ======

1:15:1   0       0       0       0       0       0       0       0

Totals   0       0       0       0       0       0       0       0


VX# show statistics channel

Command token                        Lv. Help

---------                        -- ---

:::    0 Channel specifier

all                                    0 All channels


VX# show statistics channel all

Channel       Total     Connected Refused   Errored   CntTime   IVRTime

===========   =======   ========= ========  ========  ========  =======

Totals        0         0         0         0         0         0

VX#


show syslog

VX# show syslog

Trace Logging to SysLog Server        Disabled

SysLog Server DNS name or IP address

SysLog Facility being used            LOCAL0


VX Debug Level to SysLog Severity mappings:


Debug 0    Debug

Debug 1    Debug

Debug 2    Debug

Debug 3    Debug

Debug 4    Debug

Info 0    Informational

Info 1    Informational

Info 2    Informational

Info 3    Notice

Info 4    Notice

Minor 0    Warning

Minor 1    Warning

Minor 2    Error

Major 0    Critical

Major 1    Alert

Critical    Emergency


Number of SysLog messages sent  0

Number of SysLog bytes sent     0
show system

VX# show system

Current global configuration:

Activation Key 1                    1CDF189E

Activation Key 2                    00000000

VXgate time sync enabled            false

VXgate node ID for time sync        current CDR destination

VXgate time sync interval           21600 sec

VXgate time sync maximum change     7200 sec

SPM private address block           10.10.0.0

SPM private netmask                 255.255.0.0

Mute DTMF                           Inband: MUTE Out-of-band: SENT

PCM Input gain                      0 (+0dB)

DSP Output Volumn                   0 (+OdB)

Force 2-way audio                   disabled

Local certificate name              abcd

Allow TLS transport fallback        disabled

Domian login requires TLS           disabled

All untrusted root certificate      disabled

SIP Max-Forwards                    70

Session Timeout (for this session)  120 minutes

Max Login Attempts                  3

Lockout Period                      10 seconds

User account timeout                Never

Password age                        Never

Previous passwords to forbid        None


show terminal

VX# show terminal

Current window size:   80x92

Current terminal type: ANSI
show time

VX# show time

The system time is: Friday November 05, 2004 06:06:41 AM

Trace timestamp would be: [20041105.060641.257\
show trace

VX# show trace

Trace log last started: 2004-11-04T04-03-27

Trace Log: Enabled

H323 trace log: Disabled


Trace enabled for CLI viewing     Trace to be logged to disk

Trace facility          Level     Trace facility       Level

----------          ---     --------       ---

none                              sys                      0

cli                      0

tel                      0

sig                      0

vox                      0

cas                      0

isdn                     0

cfg                      0

proc                     0

bcmp                     0

bdap                     0

bdp                      0

bmp                      0

bsp                      0

ftp                      0

ibp                      0

rcp                      0

vtp                      0

ana                      0

db                       0

snmp                     0

nms                      0

isal                     0

isup                     0

rtp                      0

ip                       0

h323                     0

sip                      0

ac                       0

pt                       0

tdm                      0

ivr                      0

q931                     0

ar                       0

stu                      0

spm                      0

ssys                     0

stel                     0

arp                      0

scmd                     0

pak                      0

aud                      0

Trace channel filter: disabled


Trace log rotation disabled.

Trace logs will never be deleted.

If trace to disk is enabled, trace files will be written until the disk

is almost full, then trace to disk will be disabled.

VX#

show tone-table

VX# show tone-table

Command token                          Lv. Help

---------                              -- ---

<1-32767>                              0 Tone table number


VX# show tone-table 1

No tone table.
show translate

VX# show translate

Command token                          Lv. Help

---------                              -- ---

<1-32767>                              0 Translation table number


VX# show translate 1

No translation table.
show trunk-group


VX# show trunk-group 1

=================================

Current configuration:

Trunk description:          sip-in

Inbound translation table:  1

Outbound translation table: 1

Cause Code Reroute table:   NONE

LLEM Peer Node ID:          0:0:0:0

LLEM Peer Trunk Group ID:   0

LLEM Local Alarm:           Blue Alarm

NCAS Diffserv:                    01011000

Direct connected carrier:   No

Carrier code:

SP:                         0

Destination point code:

First CIC:                  0

Routing table:              4

Direction:                  BIDIRECTIONAL

Dual seizure control:       none channels

Outgoing ISUP group messages: Disabled

Type:                       normal

Hunting Type:               standard

AAA Function:

Media Class:                0

Media Handling:             Passthrough

Passthrough Mode:           Secure and Unsecure

Gatekeeper IP:

Gatekeeper ID:

H323ID:

H323 Trunk Phone Number:    123

Gatekeeper Autodiscovery:   Disabled

TimeToLive Setting:         Unspecified

NAT Traversal:              Disabled

Unregistration Mode:        0

RAI Threshold:              90

SIP Registrant Mode:        NO

SIP Proxy-Like Mode:        NO

SIP Challenger Mode:        NO

Registrar Address:

Backup Registrar Address:

Realm:

Register Retry:             0

Subscriber Table:           0

Reject non Subscribers:     NO

Outbound Proxy Address:

Music On Hold Audio File:

UMS Address:

Enable SIP over TCP:        YES

Enable SIP over UDP:        YES

Enable SIP over TLS:        NO

Enable SIP over Mutual TLS: NO

Enable SIP TLS Persistent Connection for Registration: NO

Reuse SIP TLS Connection for Registrant: NO

Remote certificate Name:

Enable remote certificate name check: NO

Allow SIP URI for TLS:      NO

Min Proxy Register TTL:     0

RTCP:                       Enabled

Mode:                    RTCP

Transmission Interval:   15 seconds

SIP Session Expires:        1800 secs



Current trunk group status:


Trunk name:                 sip in

Inbound translation table:  NONE

Outbound translation table: NONE

Destination point code:

First CIC:                  0

Direction:                  BIDIRECTIONAL

Dual seizure control:       none channels

Outgoing ISUP group messages:Disable

Hunting type:               standard

AAA Function:

This trunk is not using a gatekeeper

This trunk is not a Registrant



Item TG# Address of Record   Contact Address   NAT Address      Expires   TransportType


==== === ================ ================================ ======================


VX# show trunk-group 1

Current configuration:

Trunk description: From Abacus

Inbound translation table: 0

Outbound translation table: 0

Cause Code Reroute table: NONE

: :

AAA Function:

Media Class: 1

Media Handling: Passthrough =?

Passthrough Mode: Secure Only =?

SIP Session Expires: 1800 secs

: :



VX# show trunk-group 1

Current configuration:

Trunk description: From Abacus

Inbound translation table: 0

Outbound translation table: 0

Cause Code Reroute table: NONE

: :

AAA Function:

Media Class: 1

Media Handling: Passthrough =?

Passthrough Mode: Secure and Unsecure =?

SIP Session Expires: 1800 secs

: :

Reject non Subscribers:     NO

Outbound Proxy Address:

Music On Hold Audio File:


:


VX# show trunk-group 1

Current configuration:

Trunk description: From Abacus

Inbound translation table: 0

Outbound translation table: 0

Cause Code Reroute table: NONE

: :

AAA Function:

Media Class: 1

Media Handling: Termination =?

Media Crypto Class: 1 =?

SIP Session Expires: 1800 secs


Reject non Subscribers:     NO

Outbound Proxy Address:

Music On Hold Audio File:   music

:


show users

VX# show users

Command token                        Lv. Help

---------                        -- ---




VX# show users

Username          Disabled  Default level  Access levels     Connections

================  ========  =============  =============     ===========

VX                No        0              0, 15             SSH


show v150umr-profile arg
show version
VX# show version

VXIP(tm) version 3.7v15

Copyright (C) 2004 Network Equipment Technologies, Inc.

Compiled by keithh on Nov  2 2004 at 17:11:09

VOP Library version 4.0.01


VX has been up 1 day, 2 hours, 6 minutes, 17 seconds

Last restart reason was service stopped

Image file is 'C:\VX\VXIP.exe'


Running SPM version: 3.7v15


Windrvr.sys version: 5.22b


Windows NT 5.00 (build 2195, Service Pack 3 3.00)

System has been up 1 day, 2 hours, 8 minutes, 13 seconds
show wan

VX# show wan

Command token                       Lv. Help

---------                           -- ---

dial-up                             0 Show information on the dial-up WAN adapter

serial                              0 Show information on the serial line

history                             0 Show the last Dial-up WAN state changes


show wan dial-up


VX# show wan dialup

Interface name                   ppp1

Number of channels               2

Interface direction              bi-directional

Dial percentage                  80

Dial delay time                  3

Hangup percentage                30

Hangup delay time                5

Require encrypted password       enabled

Local IP address requested       192.168.10.1

Inbound IP address minimum       192.168.11.1

Inbound IP address maximum       192.168.11.5

Dialout user name                user

Dialin user name                 inbounduser

Phone number to dial             5551212

Delay between redials            10

Local IP address negotiated      192.168.10.1

Remote IP address negotiated     192.168.10.15

Connected:                       Outbound

Current bandwidth                128 kbps

Connected Duration               55 seconds


show wan serial
 
SHOAUT# show wan serial 2

Enabled        :  Enabled

Interface      :  soip1

Cable Type     :  V35

DMA Mode       :  Enabled

Line state     :  Up (cts dcd)

Time up        :  3 seconds

Type           :  Serial DCE

Clock Source   :  H.100 Bus

Mode           :  Unstructured Serial over IP

LineSpeed      :  1024 bps

Current Rx     :  0 bps

Current Tx     :  0 bps

Up indication  :  DTR RTS

Dn indication  :  dtr rts

Keepalives     :  Disabled

Crypto Rst     :  Disabled

Process Rx Ctrl:  Ignore

Terminal Timing:  Enabled

UnStructured SoIP Configuration:

Remote Loopback      : Disabled

Segment size         : 1000

Jitter segments      : 100

Receive CBID         : 6

Transmit CBID        : 6

DiffServ Priority    : 00000000

Destination IP       : 134.56.72.135

UnStructured SoIP Status:

Jitter Management                   : Initialized

Effective jitter tolerance          : 101 segments (781260 ms)

Lost Unstructured SoIP packet count : 0

Serial segments received            : 0

Serial segments transmitted         : 0

Note: Counters are reset, whenever SAToP sequences are re-synchronized

Above command when executed at service level has the following additional information:

Extended info for soip1:

Port:                \Device\SDCI0\1

Serial #:            J1179009

Firmware:            0.0.65

CPU speed:           50 MHz

No. Ports:           4

Rx line signals:     cts dcd

Tx line signals:     DTR RTS

Rx frames detected:  0

Rx frames received:  0

Rx frames processed: 0

Avail tx frame size: 8192

Tx frames processed: 0

Tx frames completed: 0

Status messages:     0/0

OpenedCount:         0

StatusArray[ 0\:     0

StatusArray[ 1\:     0

StatusArray[ 2\:     0

StatusArray[ 3\:     0

StatusArray[ 4\:     0

StatusArray[ 5\:     0

StatusArray[ 6\:     0

StatusArray[ 7\:     0

StatusArray[ 8\:     0

StatusArray[ 9\:     0

StatusArray[10\:     0

Primary clock configuration:

Version   : 2

Mode      : H.100 Bus-B master

Feed from : Serial card oscillator

Fallback  : Yes

Backup clock configuration:

Version   : 2

Mode      : H.100 Bus-B master

Feed from : Serial card oscillator

Fallback  : Yes

Serial Clocking Status:

Version                 : 1

Primary Clock Status    : out-of-tolerance

Backup Clock Status     : out-of-tolerance

Current Config Reference: primary-configuration

H.100 Bus-A status      : out-of-tolerance

H.100 Bus-B status      : out-of-tolerance

uCurrentStatusSummary   : 0x1c0
show wan history
VX# show wan history[20041124.111812.543\ WAN History cleared by CLI.

[20041124.115422.123\ Requesting dial of ppp1 to '5551212'
show who

VX# show who

User is in configuration mode

Session  Username          Login time          Idle time      Client address

======== ================= =================== ============== ==============

00000420 VX             2004-11-05T05:43:37 00:00:00       lo0/134.56.105.141
show registrar-table
VX# show registrar

Command token                        Lv. Help

---------                        -- ---




VX# show registrar


TG# Address of Record   Contact Address                 NAT Address            Expires

=== ================ ================================ ======================    =====

No SIP devices have registered with any trunkgroups.


show r-2 table

VX# show r2-table 1

Entry Function                                           Mapped to

--- -------------------------------------------- -------------------

1     Subscriber's Line Free, Charge                     Tone 1


shutdown

Purpose

Shut the system down

Command Mode

global

Required Access

level 15

Syntax

shutdown system <now | cancel>

Parameters and Operations

Description

now

Perform a shutdown now.

VX# shutdown system now
Copy running-config to startup-config [yes/no\: n
Are you sure you want to shutdown without saving [yes/no\: n
VX

cancel

Cancel a pending shutdown.

sip-timer

Purpose

Sets Timer T1 or T2 or T4 or Timer D.

Command Mode

global

Required Access

level 15

Syntax

write <Timer> <T>

Parameters and Operations

Description

Timer





T

Specifies the timer to change. Valid values are:
t1 - RTT Estimate
t2 - Maximum retransmit interval for non-INVITE req/INVITE resp
t4 - Maximum duration a message will remain in the network.
td - Timer D - Wait time for response retransmits

Specifies the time in milliseconds where:
t1 can be 500-10000
t2 can be 4000-80000
t4 can be 5000-10000.
td can be 32000-64000


VX# sip-timer t1 1000
SIP Timer T1 was changed from 500 to 1000 ms.
VX#
VX# sip-timer td 40000
SIP Timer TD was changed from 32000 to 40000 ms.
VX#

snapshot

Purpose

Write the in-memory log file (level 0 trace) to disk You can perform this operation even if trace is disabled.

Command Mode


Required Access

level 15

Syntax

snapshot log disk trace

Parameters and Operations

Description

log-disk

Save log files to disk.

trace

Save trace log ring buffer.

VX# snapshot log-disk trace
Trace log snapshot successfully written to file [C:\VX\Public\Debug\snapshot*2004-11-05*06.19.56.txt\.
VX#

snmp

Configure Command

snmp

Purpose

Modify SNMP Information

Command Mode

config

Required Access

level 15

Syntax

snmp <option> <modifier>

Task

Syntax

Options/Modifier

Example

1. Set the SNMP Community Name and SNMP Trap Community Name: Type the name of the read community in your command entry.

snmp

read-community

VX/config# snmp read-community sample

2. Set the SNMP System Contact: Type the name of the system contact in your command entry.

snmp

system-contact

VX/config# snmp system-contact anybody

3. Enable or Disable MIB-II Support

snmp

mib-ii

  • enable
  • disable

VX/config# snmp mib-ii disable enable
VX/config# snmp mib-ii disable disable

4. Set the SNMP System Location: Type the name of the location in your command entry.

snmp

system-location

VX/config# snmp system-location anywhere

5. Manage the SNMP Trap Destination: Add or delete an IP address from the list of IP addresses to which SNMP sends traps.

snmp

trap

  • add
  • delete
  • ip address [not supported]

VX/config# snmp trap add 1.1.2.1
VX/config# snmp trap delete 1.1.2.1