Skip to end of metadata
Go to start of metadata

The UC environment for a SIP looks like that shown below.

The UC-SIP Environment

It is likely you will need to make some changes to your configuration. Typical Call Route and Trunk Group configurations are shown in in the illustration below. Note the highlighted parameters.

Typical SIP Call Route Configuration

Typical SIP Trunk Configuration

Click the Transmit button in VXbuilder to apply the configuration changes.

Configuring Your SIP Phone

This section shows how your SIP phone should be configured. Double click the SIP phone to be configured.

Configuring Your SIP Phone

Configuring the SIP Phone Settings

Select Settings to display the Settings - Server screen as shown below.

SIP Settings - Server

SIP from VXbuilder Perspective

Your SIP phone is now ready to make the SIP call shown below (from the perspective of VXbuilder).

SIP from VXbuilder Perspective