The VX900C is supported with Release 5.2.
VX900C Chassis Front Panel
The chassis front panel connector panel provides Ethernet ports, a PCI serial port, operation LEDs for the serial port, and air intake vents for the fan and filter assemblies.
# | Name | Description |
---|---|---|
1 | FAN | Air intake vent for fan. |
2 | PCI Slot | Used for 4 Port Serial Interface card. This card supports transporting data from serial interfaces over an IP network. |
3 | Serial Interface LEDs | LED indicators for PCI slot. These LEDs indicate activity on the slot. See LEDs for LED definitions. |
4 | Vent | Air vent. |
5 | Ethernet Ports | Two Ethernet ports for WAN/LAN connectivity (8-pin RJ-45). For Ethernet signal specifications, see Ethernet Port Signals. |
VX900C Chassis Rear Panel
The chassis rear panel provides connection to the Ethernet port, Serial port, and network interface ports.
# | Name | Description |
---|---|---|
1 | Fan | Air intake vent for fan. |
2 | Power Inlet | Main AC power inlet. For power specifications, see Environmental and Electrical Specifications. |
3 | Power Switch | Main AC power switch. |
4 | Fan | Air intake vent for fan. |
5 | Grounding Bolt | Grounding bolt for chassis grounding. See Power and System Grounding. |
6 | Ethernet port | Ethernet port for WAN/LAN connectivity (8-pin RJ-45). See Ethernet Port Signals. |
7 | Serial COM Port | COM 1 Serial connection (RS232 connection). For Serial COM port signals, see Serial COM Port Signals. |
8 | WAN Interface Ports | Modules used in these ports support T1/E1 and FXS connectivity. See T1, E1 Interfaces. |
9 | WAN LEDs | LEDs that indicate the activity of the WAN ports. |
Plug-in Feature Modules supported on the VX900C