Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Noprint
Panel
borderColorgreen
bgColortransparent
borderWidth2

Back to Table of Contents 

Panel

In this section:

Table of Contents

Available_since
TypeAvailable Since
Release5.1.1

 

 

To configure the HPC/GETS feature, perform the following configuration steps:

Panel
borderColortransparent
bgColortransparent

SBC Configuration

  1. Creating an HPC Call Profile
  2. Enabling the HPC Call Profile
  3. Attaching the HPC Call Profile to the Egress and Ingress Sip Trunk Groups
  4. Optionally update default CAC hpcOversubscription

External PSX Configuration

EMS Configuration

Note

SBC supports configuring up to 256 HPC Call Profiles.

Anchor
SBC Configuration
SBC Configuration
SBC Configuration

Anchor
Creating an HPC Profile
Creating an HPC Profile
Creating an HPC Call Profile

To create an HPC Call Profile, execute the following command:

Code Block
% set profiles services hpcCallProfile testHpcProfile

Anchor
Enabling the HPC Profile
Enabling the HPC Profile
Enabling the HPC Call Profile

To enable the HPC call profile, execute the following command:

Code Block
% set profiles services hpcCallProfile testHpcProfile enabled

Anchor
Attaching the HPC Profile to the Egress and Ingress Sip Trunk Groups
Attaching the HPC Profile to the Egress and Ingress Sip Trunk Groups
Attaching the HPC Call Profile to the Egress and Ingress Sip Trunk Groups

To attach an HPC call profile to Sip Trunk Group, execute the following command:

Code Block
% set addressContext default zone defaultzone sipTrunkGroup TG_ING services hpcCallProfile testHpcProfile
Code Block
% set addressContext default zone defaultzone sipTrunkGroup TG_EGR services hpcCallProfile testHpcProfile 

Anchor
Optionally Update Default CAC hpcOversubscription
Optionally Update Default CAC hpcOversubscription
Optionally Update Default CAC hpcOversubscription

To configure CAC hpcOversubscription, execute the following command:

Code Block
% set addressContext default zone defaultzone cac hpcOversubscription 10
or
% set addressContext default zone defaultzone cac ingress hpcOversubscription 10
or
% set addressContext default zone defaultzone cac egress hpcOversubscription 10
or
% set addressContext default zone defaultzone sipTrunkGroup TG_ING cac hpcOversubscription 10
% set addressContext default zone defaultzone sipTrunkGroup TG_EGR cac hpcOversubscription 10
or 
% set addressContext default zone defaultzone sipTrunkGroup TG_ING cac ingress hpcOversubscription 10
% set addressContext default zone defaultzone sipTrunkGroup TG_EGR cac ingress hpcOversubscription 10
or
% set addressContext default zone defaultzone sipTrunkGroup TG_ING cac egress hpcOversubscription 10
% set addressContext default zone defaultzone sipTrunkGroup TG_EGR cac egress hpcOversubscription 10

Anchor
External PSX Configuration
External PSX Configuration
External PSX Configuration

For information on external PSX configuration, refer to the section Provisioning GETS Support for SIP Calls.

Anchor
EMS Configuration
EMS Configuration
EMS Configuration

For information on NW-HPC license, refer to the section Licensed Applications and Features.

Pagebreak