Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Parameters

Parameter Name Required Service Affecting Data Type Default Value Possible Values Description
DescriptionNoNostringnone64 - Max LengthA description of the profile.
HoldYesNoEnum0Possible values:
  • 0 - btFalse
  • 1 - btTrue
Used to enable/disable the Hold/Off Hold feature. If it is enabled, the user can hit flash hook to put the acitive call on hold (a dial tone will be played).
TransferYesNoEnum0Possible values:
  • 0 - btFalse
  • 1 - btTrue
Used to enable/disable the Transfer feature. If it is enabled, the user can hit flash hook to get a dial tone (the active call will be put on hold) and to start dialing the phone number that the active call will be transferred to. Hold is a precondition for Transfer, if Hold is set to false then Transfer will automatically be set to false.
CallWaitingYesNoEnum0Possible values:
  • 0 - btFalse
  • 1 - btTrue
Used to enable/disable the Call Waiting feature. If it is enabled, the user currently on an call will hear the Call Waiting beep indicating an incoming call (The user will use flash hook to toggle between the two calls).

Tip
titleHelpful Tip

The POST can contain either only the attributes that are being updated, or the full set of attributes for the resource