Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 5.3

The UC environment for a SIP looks like that shown below.

Anchor
UC-SIP Environment
UC-SIP Environment

Panel
titleThe UC-SIP Environment

It is likely you will need to make some changes to your configuration. Typical Call Route and Trunk Group configurations are shown in in the illustration below. Note the highlighted parameters.

Anchor
Typical SIP Call Route Configuration
Typical SIP Call Route Configuration

Panel
titleTypical SIP Call Route Configuration

Anchor
Typical SIP Trunk Configuration
Typical SIP Trunk Configuration

Panel
titleTypical SIP Trunk Configuration

Click the Transmit button in VXbuilder to apply the configuration changes.

Configuring Your SIP Phone

This section shows how your SIP phone should be configured. Double click the SIP phone to be configured.

Anchor
Configuring Your SIP Phone
Configuring Your SIP Phone

Panel
titleConfiguring Your SIP Phone

Configuring the SIP Phone Settings

Select Settings to display the Settings - Server screen as shown below.

Anchor
SIP Settings - Server
SIP Settings - Server

Panel
titleSIP Settings - Server

SIP from VXbuilder Perspective

Your SIP phone is now ready to make the SIP call shown below (from the perspective of VXbuilder).

Anchor
SIP from VXbuilder Perspective
SIP from VXbuilder Perspective

Panel
titleSIP from VXbuilder Perspective