Search

Page tree
Skip to end of metadata
Go to start of metadata

 

 

Table of Contents

 

Document Overview

This document provides a configuration guide for Sonus SBC 5XX0 series (Session Border Controller) when connecting to Skype for Business 2015 and AT&T Flexible Reach SIP Trunk.

This configuration guide supports features provided in Microsoft Technet web page.

Introduction

The interoperability compliance testing focuses on verifying inbound and outbound calls flows between Sonus SBC 5XX0 and Skype for Business 2015.

Audience

This is a technical document intended for telecommunications engineers with the purpose of configuring both the Sonus SBC and the third-party product. Some steps will require navigating third-party as well as the Sonus SBC Command Line Interface (CLI). Understanding the basic concepts of TCP/UDP, IP/Routing, and SIP/RTP are also necessary to complete the configuration and for troubleshooting, if necessary.

This configuration guide is offered as a convenience to Sonus customers. The specifications and information regarding the product in this guide are subject to change without notice. All statements, information, and recommendations in this guide are believed to be accurate but are presented without warranty of any kind, express or implied, and are provided “AS IS”. Users must take full responsibility for the application of the specifications and information in this guide.


Requirements

The following equipment and software were used for the sample configuration provided:

 

Equipment

Software Version

Sonus Networks

Sonus SBC 5200
BMC
BIOS
ConnexIP OS
SonusDB
EMA
SBX

V05.00.03-R002
V02.13.00
V02.06.00
V03.00.03-R003
V05.00.03-R002
V05.00.03-R002
V05.00.03-R002

Tenor AFM200P108-09-26

Third-party Equipment


 

Microsoft Skype for Business 2015 Mediation Server 6.0.9319.0
Polycom CX600 SIP Phone

4.0.7577.44455

VentaFax

7.6.243.597 I

Reference Configuration

The following reference configuration shows connectivity between third-party and Sonus SBC 5XX0.

Figure : Connectivity Between Third-Party and Sonus SBC 5XX0

Support

For any questions regarding this document or the content herein, please contact your maintenance and support provider.

 

Third-Party Product Features

The testing was executed with the AT&T test plan. The following features were tested:

  • Basic Call Tests Hop-off to PSTN 

  • Basic Call Tests Hop-on from PSTN

  • International Call
  • Simultaneous Calls
  • Calling Number Privacy

  • Call Hold and Resume
  • Voicemail Tests
  • 3-Way Call Conference
  • PBX-Based Attended Call Transfer

  • PBX-Based Call Forwarding Unconditional

  • PBX-Based Auto Attendant
  • PBX-Based Meet-Me Conference Bridge
  • AT&T IP Teleconferencing
  • Advanced Call Prompter
  • Operator / N11 Dialing
  • Failover Tests
  • FAX Tests with T.38
  • FAX Tests with G.711
  • Network-Based Locate Me

  • Network Based Simultaneous Ringing
  • Network-based Call Forward Unconditional
  • Network-Based Call Forwarding - Busy
  • Network-Based Call Forwarding - Ring No Answer

  • Network-Based Call Forwarding - Not Reachable
  • Network-Based Call Forwarding - Ring No Answer
  • Network-Based Consultative Call Transfer (Attended)

  • Network-Based Consultative Call Transfer (Unattended)

  • Account Code and Authorization Code

 

Verify License

SBC-RTU

 

Skype for Business 2015 Configuration

The following new configurations are included in this section:

  1. PSTN Gateway
  2. Voice Policy
  3. PSTN Usage
  4. Route
  5. Trunk Configuration

1. PSTN Gateway

Select Topology Builder > Shared Components > PSTN Gateways

Figure : Define a new IP/PSTN Gateway

 

Figure : Define FQDN

 

Figure : Define IP Address

 

Figure : Define Root Trunk

 

2. Voice Policy

Select Control Panel > Voice Routing > Voice Policy

Figure : Edit Voice Policy


 

3. PSTN Usage

Select Control Panel > Voice Routing > PSTN Usage

Figure : View PSTN Usage

 

4. Route

Select Control Panel > Voice Routing > Route

Figure : Edit Voice Route


 

5. Trunk Configuration

Select Control Panel > Voice Routing > Trunk Configuration

Figure : Edit Trunk Configuration


 

Sonus SBC 5xx0 Series Configuration

 

Complete Configuration
configure
#DSP Resources
set system mediaProfile compression 90 tone 10
commit
#UDP Port Range for RTP (media)
set system media mediaPortRange baseUdpPort 1024 maxUdpPort 65148
commit
#SMM Profiles
set profiles signaling sipAdaptorProfile History_to_Diversion state disabled advancedSMM disabled
set profiles signaling sipAdaptorProfile History_to_Diversion rule 1 applyMatchHeader one
set profiles signaling sipAdaptorProfile History_to_Diversion rule 1 criterion 1 type message
set profiles signaling sipAdaptorProfile History_to_Diversion rule 1 criterion 1 message messageTypes all
set profiles signaling sipAdaptorProfile History_to_Diversion rule 1 criterion 2 type header
set profiles signaling sipAdaptorProfile History_to_Diversion rule 1 criterion 2 header name History-Info condition exist
set profiles signaling sipAdaptorProfile History_to_Diversion rule 1 action 1 type header operation store headerInfo headerValue
set profiles signaling sipAdaptorProfile History_to_Diversion rule 1 action 1 from type header value History-Info
set profiles signaling sipAdaptorProfile History_to_Diversion rule 1 action 1 to type variable variableValue var1 variableScopeValue local
set profiles signaling sipAdaptorProfile History_to_Diversion rule 2
set profiles signaling sipAdaptorProfile History_to_Diversion rule 2 criterion 1 type variable
set profiles signaling sipAdaptorProfile History_to_Diversion rule 2 criterion 1 type variable variable variableID var1 condition exist
set profiles signaling sipAdaptorProfile History_to_Diversion rule 2 action 1 type variable operation regsub
set profiles signaling sipAdaptorProfile History_to_Diversion rule 2 action 1 regexp string ;.*>
set profiles signaling sipAdaptorProfile History_to_Diversion rule 2 action 1 to type variable variableValue var1
set profiles signaling sipAdaptorProfile History_to_Diversion rule 2 action 1 from type value value >
set profiles signaling sipAdaptorProfile History_to_Diversion rule 2 action 2 type variable operation regsub
set profiles signaling sipAdaptorProfile History_to_Diversion rule 2 action 2 regexp string ;.*$
set profiles signaling sipAdaptorProfile History_to_Diversion rule 2 action 2 to type variable variableValue var1
set profiles signaling sipAdaptorProfile History_to_Diversion rule 2 action 2 from type value value 
set profiles signaling sipAdaptorProfile History_to_Diversion rule 3 applyMatchHeader one
set profiles signaling sipAdaptorProfile History_to_Diversion rule 3 criterion 1 type message
set profiles signaling sipAdaptorProfile History_to_Diversion rule 3 criterion 1 message messageTypes all
set profiles signaling sipAdaptorProfile History_to_Diversion rule 3 criterion 2 type header
set profiles signaling sipAdaptorProfile History_to_Diversion rule 3 criterion 2 header name History-Info condition exist
set profiles signaling sipAdaptorProfile History_to_Diversion rule 3 criterion 3 type variable
set profiles signaling sipAdaptorProfile History_to_Diversion rule 3 criterion 3 variable condition exist variableID var1
set profiles signaling sipAdaptorProfile History_to_Diversion rule 3 action 1 to type header value Diversion
set profiles signaling sipAdaptorProfile History_to_Diversion rule 3 action 1 type header operation add headerPosition last
set profiles signaling sipAdaptorProfile History_to_Diversion rule 3 action 1 from type variable variableValue var1
set profiles signaling sipAdaptorProfile History_to_Diversion state enabled advancedSMM disabled
commit
#Element Routing Priority
set profiles callRouting elementRoutingPriority TG_ERP entry internationalType 0 entityType trunkGroup
set profiles callRouting elementRoutingPriority TG_ERP entry nationalType 0 entityType trunkGroup
set profiles callRouting elementRoutingPriority TG_ERP entry localOperator 0 entityType trunkGroup
commit
#Tone and Announcement Profile
set profiles media toneAndAnnouncementProfile TAPL localRingBackTone signalingTonePackageState enable signalingTonePackage DEFAULT precedence lower makeInbandToneAvailable enable
set profiles media toneAndAnnouncementProfile TAPL localRingBackTone flags useThisLrbtForEgress enable useThisLrbtForIngress disable dynamicLRBT enable forceLRBT disable
set profiles media toneAndAnnouncementProfile TAPL toneAndAnnouncement announcementPackageState disable
commit
#Skype codecs
set profiles media codecEntry SKYPE_G711U_20ms_2833 codec g711 packetSize 20 law ULaw
set profiles media codecEntry SKYPE_G711U_2833_SS codec g711ss packetSize 20 law ULaw sendSid enable
set profiles media codecEntry SKYPE_G711U_2833_SS dtmf relay rfc2833 removeDigits enable
set profiles media codecEntry SKYPE_G711U_20ms_2833 dtmf relay rfc2833 removeDigits enable
set profiles media codecEntry SKYPE_G711U_2833_SS fax failureHandling continue toneTreatment none
set profiles media codecEntry SKYPE_G711U_20ms_2833 fax failureHandling continue toneTreatment none
set profiles media codecEntry SKYPE_G711U_20ms_2833 modem failureHandling continue toneTreatment none
set profiles media codecEntry SKYPE_G711U_2833_SS modem failureHandling continue toneTreatment none
commit
#ATT codecs
set profiles media codecEntry ATT_G729A-20ms_2833 codec g729a packetSize 20 preferredRtpPayloadType 128
set profiles media codecEntry ATT_G711U_20ms_2833 codec g711 packetSize 20 law ULaw
set profiles media codecEntry ATT_G729AB-20ms_2833 codec g729ab packetSize 20 preferredRtpPayloadType 128
set profiles media codecEntry ATT_G729A-20ms_2833 dtmf relay rfc2833 removeDigits enable
set profiles media codecEntry ATT_G711U_20ms_2833 dtmf relay rfc2833 removeDigits enable
set profiles media codecEntry ATT_G729AB-20ms_2833 dtmf relay rfc2833 removeDigits enable
set profiles media codecEntry ATT_G729A-20ms_2833 fax failureHandling continue toneTreatment faxRelay
set profiles media codecEntry ATT_G729AB-20ms_2833 fax failureHandling continue toneTreatment faxRelay
set profiles media codecEntry ATT_G711U_20ms_2833 fax failureHandling continue toneTreatment faxRelay
set profiles media codecEntry ATT_G729A-20ms_2833 modem failureHandling continue toneTreatment applyFaxTreatment
set profiles media codecEntry ATT_G729AB-20ms_2833 modem failureHandling continue toneTreatment applyFaxTreatment
set profiles media codecEntry ATT_G711U_20ms_2833 modem failureHandling continue toneTreatment applyFaxTreatment
commit
#DNS entry
set addressContext default dnsGroup DNS localRecord SKYPE2015 data 1 type a priority 0 ipAddress 10.35.180.229 state enabled
set addressContext default dnsGroup DNS localRecord SKYPE2015 hostName fe.skype2015.sonusnet.com state enabled order priority
set addressContext default dnsGroup DNS
commit
#Internal Side Configuration
#IP Interface Group
set addressContext default ipInterfaceGroup IPIG1 ipInterface IPIF1 ceName saline portName pkt0 ipAddress 10.35.177.250 prefix 26 mode outOfService state disabled
commit
set addressContext default ipInterfaceGroup IPIG1 ipInterface IPIF1 mode inService state enabled
commit
#IP Static Route
set addressContext default staticRoute 0.0.0.0 0 10.35.177.193 IPIG1 IPIF1 preference 100
commit
#SBC Configuration for Skype 2013 Trunk
#Packet Service Profile (PSP)
set profiles media packetServiceProfile SKYPE_PSP codec codecEntry1 SKYPE_G711U_20ms_2833
set profiles media packetServiceProfile SKYPE_PSP dataCalls preferredRtpDataPayloadType 56 initialPlayoutBufferDelay 50 packetSize 20
set profiles media packetServiceProfile SKYPE_PSP packetToPacketControl codecsAllowedForTranscoding thisLeg g711a g711u g729 otherLeg g711a g711u g729
set profiles media packetServiceProfile SKYPE_PSP packetToPacketControl transcode conditional
set profiles media packetServiceProfile SKYPE_PSP rtcpOptions rtcp enable
commit
#IP Signaling profile
set profiles signaling ipSignalingProfile SKYPE_IPSP commonIpAttributes flags disableMediaLockDown enable includeReasonHeader enable 
set profiles signaling ipSignalingProfile SKYPE_IPSP commonIpAttributes flags minimizeRelayingOfMediaChangesFromOtherCallLegAll enable sendPtimeInSdp enable 
set profiles signaling ipSignalingProfile SKYPE_IPSP commonIpAttributes flags sendRtcpPortInSdp enable storePChargingVector enable 
set profiles signaling ipSignalingProfile SKYPE_IPSP commonIpAttributes relayFlags refer enable
set profiles signaling ipSignalingProfile SKYPE_IPSP ingressIpAttributes flags sendSdpIn200OkIf18xReliable enable sendSdpInSubsequent18x enable
set profiles signaling ipSignalingProfile SKYPE_IPSP egressIpAttributes privacy flags includePrivacy enable msLyncPrivacySupport enable
set profiles signaling ipSignalingProfile SKYPE_IPSP egressIpAttributes privacy transparency disable privacyInformation pAssertedId
set profiles signaling ipSignalingProfile SKYPE_IPSP egressIpAttributes transport type1 tcp type2 none type3 none type4 none
commit
#Prefix profile
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 9 0 10 31 callType nationalType digitType national natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 13 0 2 10 callType nationalType digitType subscriber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 411 0 3 3 callType nationalType digitType directoryAssistance natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 19 0 2 10 callType nationalType digitType subscriber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 866 0 10 31 callType nationalType digitType tollFree natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 877 0 10 31 callType nationalType digitType tollFree natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 2 0 10 31 callType nationalType digitType national natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 5 0 1 9 callType nationalType digitType subscriber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 08 0 2 10 callType nationalOperator digitType subscriberOperator natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 04 0 11 31 callType nationalOperator digitType nationalOperator natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 15 0 11 31 callType nationalType digitType national natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 101 0 7 7 callType carrierCutThrough digitType carrierAccess natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 3 numberLeadingPrefixDigitsToStrip 3 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 14 0 2 10 callType nationalType digitType subscriber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 700 0 10 31 callType nationalType digitType serviceAccessCode natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 8 0 10 31 callType nationalType digitType national natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 03 0 2 10 callType nationalOperator digitType subscriberOperator natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 311 0 3 3 callType nationalType digitType easilyIdentifiableNumber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 09 0 2 10 callType nationalOperator digitType subscriberOperator natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 7 0 1 9 callType nationalType digitType subscriber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 1200 0 11 31 callType nationalType digitType serviceAccessCode natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 888 0 10 31 callType nationalType digitType tollFree natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 03 0 11 31 callType nationalOperator digitType nationalOperator natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 101 0 17 31 callType carrierCutThrough digitType carrierAccess natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 3 numberLeadingPrefixDigitsToStrip 3 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 14 0 11 31 callType nationalType digitType national natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 400 0 10 31 callType nationalType digitType serviceAccessCode natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 10 0 15 31 callType carrierCutThrough digitType carrierAccess natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 2 numberLeadingPrefixDigitsToStrip 2 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 04 0 2 10 callType nationalOperator digitType subscriberOperator natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 911 0 3 3 callType nationalType digitType emergency natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 1500 0 11 31 callType nationalType digitType serviceAccessCode natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 10 0 6 14 callType carrierCutThrough digitType carrierAccess natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 2 numberLeadingPrefixDigitsToStrip 2 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 7 0 10 31 callType nationalType digitType national natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 09 0 11 31 callType nationalOperator digitType nationalOperator natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 9 0 1 9 callType nationalType digitType subscriber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 0 0 1 1 callType nationalType digitType unknown natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 211 0 3 3 callType nationalType digitType easilyIdentifiableNumber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 950 0 7 7 callType nationalType digitType 950CarrierAccess natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 1800 0 11 31 callType nationalType digitType tollFree natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 02 0 11 31 callType nationalOperator digitType nationalOperator natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 01 0 2 31 callType internationalOperator digitType internationalOperator natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 2 numberLeadingPrefixDigitsToStrip 2 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 15 0 2 10 callType nationalType digitType subscriber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 811 0 3 3 callType nationalType digitType easilyIdentifiableNumber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 6 0 10 31 callType nationalType digitType national natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 2 0 1 9 callType nationalType digitType subscriber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 08 0 11 31 callType nationalOperator digitType nationalOperator natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 200 0 10 31 callType nationalType digitType serviceAccessCode natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 16 0 2 10 callType nationalType digitType subscriber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 05 0 2 10 callType nationalOperator digitType subscriberOperator natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 13 0 11 31 callType nationalType digitType national natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 1300 0 11 31 callType nationalType digitType serviceAccessCode natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 711 0 3 3 callType nationalType digitType easilyIdentifiableNumber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 4 0 1 9 callType nationalType digitType subscriber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 500 0 10 31 callType nationalType digitType serviceAccessCode natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 5551212 4 11 31 callType nationalType digitType directoryAssistance natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 07 0 11 31 callType nationalOperator digitType nationalOperator natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 411 1 4 4 callType nationalType digitType directoryAssistance natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 19 0 11 31 callType nationalType digitType national natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 1600 0 11 31 callType nationalType digitType serviceAccessCode natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 800 0 10 31 callType nationalType digitType tollFree natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 10 0 5 5 callType carrierCutThrough digitType carrierAccess natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 2 numberLeadingPrefixDigitsToStrip 2 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 12 0 11 31 callType nationalType digitType national natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 6 0 1 9 callType nationalType digitType subscriber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 1900 0 11 31 callType nationalType digitType 900PremiumToll natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 1855 0 11 31 callType nationalType digitType tollFree natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry * 0 3 31 callType userName digitType unknown natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 5 0 10 31 callType nationalType digitType national natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 06 0 11 31 callType nationalOperator digitType nationalOperator natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 15551212 0 8 8 callType nationalType digitType directoryAssistance natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 18 0 11 31 callType nationalType digitType national natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 17 0 2 10 callType nationalType digitType subscriber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry + 0 1 31 callType internationalType digitType international dmPmRule SIP_REMOVE_PLUS1 natureOfAddress international numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule enable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 06 0 2 10 callType nationalOperator digitType subscriberOperator natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 8 0 1 9 callType nationalType digitType subscriber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 300 0 10 31 callType nationalType digitType serviceAccessCode natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 12 0 2 10 callType nationalType digitType subscriber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 101 0 8 31 callType carrierCutThrough digitType carrierAccess natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 3 numberLeadingPrefixDigitsToStrip 3 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 5551212 3 10 10 callType nationalType digitType directoryAssistance natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 611 0 3 3 callType nationalType digitType easilyIdentifiableNumber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 1866 0 11 31 callType nationalType digitType tollFree natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 1877 0 11 31 callType nationalType digitType tollFree natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 4 0 10 31 callType nationalType digitType national natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 05 0 11 31 callType nationalOperator digitType nationalOperator natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 950 1 8 8 callType nationalType digitType 950CarrierAccess natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 17 0 11 31 callType nationalType digitType national natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 600 0 10 31 callType nationalType digitType serviceAccessCode natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 07 0 2 10 callType nationalOperator digitType subscriberOperator natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 011 0 2 31 callType internationalType digitType international natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 3 numberLeadingPrefixDigitsToStrip 3 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 5551212 0 7 7 callType nationalType digitType directoryAssistance natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 1700 0 11 31 callType nationalType digitType serviceAccessCode natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 02 0 2 10 callType nationalOperator digitType subscriberOperator natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 900 0 10 31 callType nationalType digitType 900PremiumToll natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 855 0 10 31 callType nationalType digitType tollFree natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 511 0 3 3 callType nationalType digitType easilyIdentifiableNumber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 00 0 2 2 callType longDistanceOperator digitType longDistanceOperator natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 2 numberLeadingPrefixDigitsToStrip 2 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 3 0 10 31 callType nationalType digitType national natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 1888 0 11 31 callType nationalType digitType tollFree natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 18 0 2 10 callType nationalType digitType subscriber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 16 0 11 31 callType nationalType digitType national natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 1400 0 11 31 callType nationalType digitType serviceAccessCode natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 1 numberLeadingPrefixDigitsToStrip 1 applyDmRule disable determineArea enable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry 3 0 1 9 callType nationalType digitType subscriber natureOfAddress none numberingPlanIndicator none numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable
set profiles digitParameterHandling prefixProfile ATT_DIAL_PLAN entry +1 0 2 31 callType nationalType digitType national dmPmRule SIP_REMOVE_PLUS1 natureOfAddress national numberingPlanIndicator none numberLeadingPrefixDigits 2 numberLeadingPrefixDigitsToStrip 2 applyDmRule enable determineArea enable
commit
#Numbering plan
set profiles digitParameterHandling numberingPlan ATT_DIAL_PLAN lengths areaCode min 3 max 3
set profiles digitParameterHandling numberingPlan ATT_DIAL_PLAN lengths exchangeCode min 3 max 3
set profiles digitParameterHandling numberingPlan ATT_DIAL_PLAN lengths line min 4 max 4
set profiles digitParameterHandling numberingPlan ATT_DIAL_PLAN lengths nationalNumber min 10 max 10
set profiles digitParameterHandling numberingPlan ATT_DIAL_PLAN lengths subscriberNumber min 7 max 7
set profiles digitParameterHandling numberingPlan ATT_DIAL_PLAN prefixProfile ATT_DIAL_PLAN
commit
#Zone
set addressContext default zone ZONE_INTERNAL id 2
#Assign DNS group to zone
set addressContext default zone ZONE_INTERNAL id 2 dnsGroup DNS
commit
#SIP signaling port
set addressContext default zone ZONE_INTERNAL sipSigPort 10 ipInterfaceGroupName IPIG1 ipAddressV4 10.35.177.251 portNumber 5060 mode outOfService state disabled transportProtocolsAllowed sip-udp sip-tcp
commit
set addressContext default zone ZONE_INTERNAL sipSigPort 10 mode inService state enabled
commit
#IP Peer
set addressContext default zone ZONE_INTERNAL ipPeer SKYPE2015 policy sip fqdn fe.skype2015.sonusnet.com fqdnPort 5068
commit
#SIP trunk group
set addressContext default zone ZONE_INTERNAL sipTrunkGroup TWO-WAY-SIP-SKYPE2015 media mediaIpInterfaceGroupName IPIG1 mediaIpAddress 0.0.0.0 sourceAddressFiltering enabled
set addressContext default zone ZONE_INTERNAL sipTrunkGroup TWO-WAY-SIP-SKYPE2015 signaling E164Profiles e164LocalProfile E164_ATT e164GlobalProfile E164_ATT
set addressContext default zone ZONE_INTERNAL sipTrunkGroup TWO-WAY-SIP-SKYPE2015 signaling messageManipulation inputAdapterProfile History_to_Diversion includeAppHdrs disabled
set addressContext default zone ZONE_INTERNAL sipTrunkGroup TWO-WAY-SIP-SKYPE2015 ingressIpPrefix 10.35.180.229 32
set addressContext default zone ZONE_INTERNAL sipTrunkGroup TWO-WAY-SIP-SKYPE2015 policy callRouting elementRoutingPriority TG_ERP
set addressContext default zone ZONE_INTERNAL sipTrunkGroup TWO-WAY-SIP-SKYPE2015 policy digitParameterHandling numberingPlan ATT_DIAL_PLAN ingressDmPmRule SIP_REMOVE_PLUS1 egressDmPmRule SIP_ADD_PLUS1
set addressContext default zone ZONE_INTERNAL sipTrunkGroup TWO-WAY-SIP-SKYPE2015 policy media packetServiceProfile SKYPE_PSP toneAndAnnouncementProfile TAPL
set addressContext default zone ZONE_INTERNAL sipTrunkGroup TWO-WAY-SIP-SKYPE2015 policy services classOfService DEFAULT_IP
set addressContext default zone ZONE_INTERNAL sipTrunkGroup TWO-WAY-SIP-SKYPE2015 policy signaling ipSignalingProfile SKYPE_IPSP
set addressContext default zone ZONE_INTERNAL sipTrunkGroup TWO-WAY-SIP-SKYPE2015 state enabled mode inService mediaIpInterfaceGroupName IPIG1 mediaIpAddress 0.0.0.0 sourceAddressFiltering enabled
commit
#SBC Configuration for Fax Trunk
#Packet Service Profile
set profiles media packetServiceProfile ATT_PSP codec codecEntry1 ATT_G729AB-20ms_2833 codecEntry2 ATT_G729A-20ms_2833 codecEntry3 ATT_G711U_20ms_2833
set profiles media packetServiceProfile ATT_PSP packetToPacketControl codecsAllowedForTranscoding thisLeg g711a g711u g729 t38 otherLeg g711a g711u g729 t38
set profiles media packetServiceProfile ATT_PSP packetToPacketControl conditionsInAdditionToNoCommonCodec applyFaxToneTreatment disable differentDtmfRelay enable differentPacketSize enable differentSilenceSuppression enable honorOfferPreference enable honorAnswerPreference enable different2833PayloadType enable
set profiles media packetServiceProfile ATT_PSP packetToPacketControl transcode conditional
set profiles media packetServiceProfile ATT_PSP rtcpOptions rtcp enable
commit
#IP signaling profile
set profiles signaling ipSignalingProfile FAX_IPSP egressIpAttributes privacy transparency disable privacyInformation pAssertedId
set profiles signaling ipSignalingProfile FAX_IPSP egressIpAttributes transport type1 udp type2 none type3 none type4 none
commit
#IP peer
set addressContext default zone ZONE_INTERNAL ipPeer FAX ipAddress 10.35.137.43 ipPort 5084 defaultForIp false
set addressContext default zone ZONE_INTERNAL ipPeer FAX policy description FAX packetServiceProfile FAX_PSP ipSignalingProfile FAX_IPSP
commit
#SIP trunk group
set addressContext default zone ZONE_INTERNAL sipTrunkGroup TWO-WAY-SIP-FAX media mediaIpInterfaceGroupName IPIG1 sourceAddressFiltering enabled
set addressContext default zone ZONE_INTERNAL sipTrunkGroup TWO-WAY-SIP-FAX ingressIpPrefix 10.35.137.43 32
set addressContext default zone ZONE_INTERNAL sipTrunkGroup TWO-WAY-SIP-FAX policy callRouting elementRoutingPriority TG_ERP
set addressContext default zone ZONE_INTERNAL sipTrunkGroup TWO-WAY-SIP-FAX policy digitParameterHandling numberingPlan ATT_DIAL_PLAN
set addressContext default zone ZONE_INTERNAL sipTrunkGroup TWO-WAY-SIP-FAX policy media packetServiceProfile FAX_PSP
set addressContext default zone ZONE_INTERNAL sipTrunkGroup TWO-WAY-SIP-FAX policy services classOfService DEFAULT_IP
set addressContext default zone ZONE_INTERNAL sipTrunkGroup TWO-WAY-SIP-FAX policy signaling ipSignalingProfile FAX_IPSP
set addressContext default zone ZONE_INTERNAL sipTrunkGroup TWO-WAY-SIP-FAX state enabled mode inService media mediaIpInterfaceGroupName IPIG1 sourceAddressFiltering enabled
commit
#External Side SBC Configuration
#IP Interface Group
set addressContext default ipInterfaceGroup IPIG2 ipInterface IPIF2 ceName saline portName pkt2 ipAddress 32.252.44.209 prefix 29 mode outOfService state disabled
commit
set addressContext default ipInterfaceGroup IPIG2 ipInterface IPIF2 mode inService state enabled
commit
#IP static route
set addressContext default staticRoute 0.0.0.0 0 32.252.44.214 IPIG2 IPIF2 preference 100
commit
#SBC Configuration for ATT SIP Trunk
#IP signaling profile
set profiles signaling ipSignalingProfile ATT_IPSP commonIpAttributes relayFlags refer enable
set profiles signaling ipSignalingProfile ATT_IPSP egressIpAttributes privacy transparency disable privacyInformation pAssertedId
commit
#Zone
set addressContext default zone ZONE_EXTERNAL id 3
commit
#SIP signaling port
set addressContext default zone ZONE_EXTERNAL sipSigPort 20 ipInterfaceGroupName IPIG2 ipAddressV4 32.252.44.210 portNumber 5060 state disabled transportProtocolsAllowed sip-udp
commit
set addressContext default zone ZONE_EXTERNAL sipSigPort 20 state enabled
commit
#IP peer
set addressContext default zone ZONE_EXTERNAL ipPeer ATT ipAddress 12.194.18.88 ipPort 5060
set addressContext default zone ZONE_EXTERNAL ipPeer ATT policy packetServiceProfile ATT_PSP ipSignalingProfile ATT_IPSP
set addressContext default zone ZONE_EXTERNAL ipPeer ATT2 ipAddress 12.194.20.88 ipPort 5060
set addressContext default zone ZONE_EXTERNAL ipPeer ATT2 policy packetServiceProfile ATT_PSP ipSignalingProfile ATT_IPSP
commit
#SIP trunk group
set addressContext default zone ZONE_EXTERNAL sipTrunkGroup TWO-WAY-SIP-ATT media mediaIpInterfaceGroupName IPIG2 mediaIpAddress 0.0.0.0 sourceAddressFiltering enabled 
set addressContext default zone ZONE_EXTERNAL sipTrunkGroup TWO-WAY-SIP-ATT ingressIpPrefix 12.194.18.88 32
set addressContext default zone ZONE_EXTERNAL sipTrunkGroup TWO-WAY-SIP-ATT ingressIpPrefix 12.194.20.88 32
set addressContext default zone ZONE_EXTERNAL sipTrunkGroup TWO-WAY-SIP-ATT policy callRouting elementRoutingPriority TG_ERP
set addressContext default zone ZONE_EXTERNAL sipTrunkGroup TWO-WAY-SIP-ATT policy digitParameterHandling numberingPlan ATT_DIAL_PLAN egressDmPmRule ADD_011
set addressContext default zone ZONE_EXTERNAL sipTrunkGroup TWO-WAY-SIP-ATT policy media packetServiceProfile ATT_PSP
set addressContext default zone ZONE_EXTERNAL sipTrunkGroup TWO-WAY-SIP-ATT policy services classOfService DEFAULT_IP
set addressContext default zone ZONE_EXTERNAL sipTrunkGroup TWO-WAY-SIP-ATT policy signaling ipSignalingProfile ATT_IPSP
set addressContext default zone ZONE_EXTERNAL sipTrunkGroup TWO-WAY-SIP-ATT state enabled mode inService mediaIpInterfaceGroupName IPIG2 mediaIpAddress 0.0.0.0 sourceAddressFiltering enabled
commit
#Global Configuration
#Route Labels 
set global callRouting routingLabel TO_TWO_WAY_SKYPE2015 routingLabelRoute 0 trunkGroup TWO-WAY-SIP-SKYPE2015 ipPeer SKYPE2015 proportion 0 cost 1000000 inService inService testing normal
set global callRouting routingLabel TO_TWO_WAY_ATT routingLabelRoute 3 trunkGroup TWO-WAY-SIP-ATT ipPeer ATT2 proportion 0 cost 1000000 inService inService testing normal
set global callRouting routingLabel TO_TWO_WAY_FAX routingLabelRoute 0 trunkGroup TWO-WAY-SIP-FAX ipPeer FAX proportion 0 cost 1000000 inService inService testing normal
set global callRouting routingLabel TO_TWO_WAY_ATT routingLabelRoute 2 trunkGroup TWO-WAY-SIP-ATT ipPeer ATT proportion 0 cost 1000000 inService inService testing normal
commit
#Routes
set global callRouting route trunkGroup TWO-WAY-SIP-SKYPE2015 SALINE standard Sonus_NULL Sonus_NULL all all ALL none Sonus_NULL routingLabel TO_TWO_WAY_ATT
set global callRouting route trunkGroup TWO-WAY-SIP-ATT SALINE standard Sonus_NULL Sonus_NULL all all ALL none Sonus_NULL routingLabel TO_TWO_WAY_SKYPE2015
set global callRouting route trunkGroup TWO-WAY-SIP-ATT SALINE username * Sonus_NULL all all ALL none Sonus_NULL routingLabel TO_TWO_WAY_ATT
set global callRouting route trunkGroup TWO-WAY-SIP-ATT SALINE standard 2142592290 1 all all ALL none Sonus_NULL routingLabel TO_TWO_WAY_FAX
set global callRouting route trunkGroup TWO-WAY-SIP-FAX SALINE standard Sonus_NULL Sonus_NULL all all ALL none Sonus_NULL routingLabel TO_TWO_WAY_ATT
commit
exit

 

Conclusion

These Application Notes describe the configuration steps required for Sonus SBC 5XX0  to successfully interoperate with Skype for Business 2015. All feature and serviceability test cases were completed and passed with the exceptions/observations noted in Appendix A.

Appendix A

Table : Features Not Supported

S.NoDescriptionObservationResultComment
20432

Network-Based
Call Forwarding - Busy
(CFB)

Call get forwarded on Busy Response (486 SIP Response from the CPE)

 Not Supported Skype for Bussiness doesn't send 486 
20461

Network-Based
Blind
Call Transfer

CPE must support sending REFER for the Network-Based Call Transfer

 Not Supported Skype for Bussiness doesn't send Reffered-by or Reffered-to headers , hence the call is rejected by AT&T network with 403.
20471

Network-Based
Consultative
Call Transfer
(Attended)

CPE must support sending REFER for the Network-Based Call Transfer

 Not Supported Skype for Bussiness doesn't send Reffered-by or Reffered-to headers , hence the call is rejected by AT&T network with 403.
20481

Network-Based
Consultative
Call Transfer
(Unattended)

CPE must support sending REFER for the Network-Based Call Transfer

 Not Supported Skype for Bussiness doesn't send Reffered-by or Reffered-to headers , hence the call is rejected by AT&T network with 403.