Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 20 Current »

REST API Method: PUT /rest/ripconfig/{identifier}

Creates a new RIP configuration on the Sonus SBC Edge system. Logical interface name should be provided for configuring RIP protocol on that interface. If multiple interfaces needs to be configured then the interface name should be comma separated.

Only one RIP configuration can be created.

URL:

https://192.168.0.111/rest/ripconfig/{identifier}

HTTP Method

PUT

Requires Authentication:

true

The root page @parent could not be found in space SBC 1000/2000 API.

Parameters

Parameter Name Required Service Affecting Data Type Default Value Possible Values Description
ConfigIEStateNoYesEnum1Possible values:
  • 0 - esDISABLED
  • 1 - esENABLED
Specifies the Administrative State of the resource.
RIPInstanceNameYesYesstringnone16 - Max Length Specifies RIP Protocol instance.
enableDefaultInfoOriginateYesYesEnum0Possible values:
  • 0 - btFalse
  • 1 - btTrue
Specifies whether Default Information Originate is to be enabled or disabled.
ifNameYesYesstringnone500 - Max Length Specifies logical interface name configured for particular routing instance name. If multiple interfaces need to be configured then the interface names should be comma separated.

Logical interfaces configured in the system can be obtained by performing a lookup on logicalinterface resource using GET logicalinterface

  • No labels