This page describes how to configure SNMP on the  and manage it using the iReasoning MIB Browser:

Step 1 - Configuring SNMP on the SBC

The  SNMP Management Address Table entry should be created and configured with following information:

 

 

Step 2 - Installing an SNMP Management Client

There are a various number of MIB Browsers available to download and use on the internet. For this exercise, we will be using a free edition of the iReasoning MIB Browser.

Follow the steps below to install, configure, and use the iReasoning MIB Browser:

  1. On a PC that is dedicated to be the SNMP Manager download iReasoning MIB Browser and install using the default settings.
  2. Launch iReasoning from the start menu.
  3. Click the Advanced...button as shown below and enter the following information:

Step 3 - Start Managing SBC via SNMP

To start managing the  via SNMP, load the 's SNMP MIB files files into the iReasoning MIB Browser:

  1. Download the MIB files located on the SNMP MIBs Reference page.
  2. In the iReasoning MIB Browser, click the File menu and select Load MIBs.

  3. Browse to location where you saved the MIB files obtained in the initial step.
  4. Select all MIB files and click Open.

Traps include both alarms and events. If you want to receive Trap for alarms and events from the , perform the following steps ( example is used here):

  1. In the iReasoning MIB Browser, click the Tools menu item and select Trap Receiver as shown below:

  2. Click Trap Filter, add the IP address of Sonus SBC 1000/2000 node, and click OK.

  3. Navigate to the private folder* navigation pane to see the relevant Sonus SBC 1000/2000 MIBs as shown below: